American Megatrends MAN-3200-SG setup guide Enter Volume Name, Enter Volume Size

Page 27

Enter Volume Name

In the Enter Volume Name field, enter a name for your SAN Volume. The SAN Volume Name must be alphanumeric, not have any spaces and be between one and 63 characters in length.

Enter Volume Size

In the Enter Volume Size field, enter the size that you want to use for your SAN Volume. The field is measured in Giga-Bytes GB.

Select Thin or Exact Provisioning

Select the type of provisioning that you want to use.

If you select Thin, the volume can be assigned a size greater than the actual physical size of the storage device. For example, if the storage device has an actual physical size of 500 GB, the user can assign a size of up to 8 TB per box. Based on the consumption of the storage device’s physical capacity, more physical drive capacity can be added later as desired.

If you select Exact, the volume size cannot exceed the actual physical space available in the storage device.

Note: It is recommended to leave 20% of the physical space free for snapshots.

StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7) 27

Image 27
Contents Unpack the StorTrends 3200 Storage Appliance Thank YouChoosing a Setup Location Preparing for SetupGeneral Safety Precautions General Safety PrecautionsInstalling the System into a Rack Rack Mounting ConsiderationsInner Rack Rails To install the rack rails Installing the Inner Rack RailsTo install the Outer Rack Rails Installing the Chassis into the Server Rack Outer Rack RailsSteps Description Step Description Completing the Hardware InstallationStep Description Step Two Get the IP address Step One Power your system onStep Four Logging on to the StorTrends Storage Appliance PasswordUsing the Quick and Easy Setup Wizard Step One Quick and Easy Wizard Step Two RAID Level Step Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View StorTrends 3200 Set Up Guide StorTrends iTX version Step Six All Done No Errors Step One Advanced Wizard Using the Advanced Setup WizardStep Two Create a New Storage Pool Select the Disks Step Three Select PoolSet the RAID Levels Type in a Storage Pool Name Type in your Storage Pool’s nameStorTrends 3200 Set Up Guide StorTrends iTX version 2.7 Step Four Configure SAN Volume Enter Volume Name Enter Volume SizeSelect Thin or Exact Provisioning Create Target and Target Name Select SAN as the Dialect TypeStep Five Configure NAS Volume Enter Volume Name Create Share and Share Name Select NAS as the Dialect TypeStep Six Summary View and Status Step Seven All Done No Errors