Step Description | American Megatrends MAN-3200-SG specs

Completing the Hardware Installation

Next, you should check to make sure that the hard disk drives have been properly inserted and have not come loose in transit.

Step		Description
1.	Checking the drive	All hard disk drives can be accessed from the front of the server.
bays		Verify that the hard disk drive trays are inserted all the way into its
		bay.
2.	Check the airflow	Airflow is provided by five high-performance fans. The system
		component layout was carefully designed to promote sufficient
		airflow through the 3U rack mount space. Verify that all cables in
3.	Connect your	your rack are not obstructing the chassis’s airflow.
3.	Connect your	Plug your Network Cable to both of
network cable(s)		Plug your Network Cable to both of
		these ports or just one of them.

4. Connect your	Plug your Keyboard Here
keyboard and monitor

5. Supply power to the

The last thing you must do is to provide input power to the system.

system

Plug the two power cords from the power supply units into a high-

quality power strip that offers protection from electrical noise and

power surges. It is recommended that you use an uninterruptible

power supply (UPS).

6.Power your system

Power on by pressing this button.

7. Get the IP address

Once the StorTrends® Storage Appliance is fully operational, you will see the following screen. Write down the IP Address listed in the

8	StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7)