American Megatrends MAN-3200-SG setup guide Enter Volume Name

Page 30

Enter Volume Name

In the Enter Volume Name field, enter a name for your NAS Volume. The NAS Volume Name must be alphanumeric, not have any spaces and be between one and 63 characters in length.

Enter Volume Size

In the Enter Volume Size field, enter the size that you want to use for your NAS Volume. The field is measured in Giga-Bytes GB.

Select Thin or Exact Provisioning

Select the type of provisioning that you want to use.

If you select Thin, the volume can be assigned a size greater than the actual physical size of the storage device. For example, if the storage device has an actual physical size of 500 GB, the user can assign a size of up to 8 TB per box. Based on the consumption of the storage device’s physical capacity, more physical drive capacity can be added later as desired.

If you select Exact, the volume size cannot exceed the actual physical space available in the storage device.

Note: It is recommended to leave 20% of the physical space free for snapshots.

30

StorTrends® 3200 Set Up Guide (StorTrends iTX version 2.7)

Image 30
Contents Thank You Unpack the StorTrends 3200 Storage AppliancePreparing for Setup Choosing a Setup LocationGeneral Safety Precautions General Safety PrecautionsInstalling the System into a Rack Rack Mounting ConsiderationsInner Rack Rails Installing the Inner Rack Rails To install the rack railsInstalling the Chassis into the Server Rack Outer Rack Rails To install the Outer Rack RailsSteps Description Completing the Hardware Installation Step DescriptionStep Description Step One Power your system on Step Two Get the IP addressPassword Step Four Logging on to the StorTrends Storage ApplianceUsing the Quick and Easy Setup Wizard Step One Quick and Easy Wizard Step Two RAID Level Step Three SAN or NAS or Both Step Four Allocating Space Step Five Summary View StorTrends 3200 Set Up Guide StorTrends iTX version Step Six All Done No Errors Using the Advanced Setup Wizard Step One Advanced WizardStep Two Create a New Storage Pool Step Three Select Pool Select the DisksSet the RAID Levels Type in your Storage Pool’s name Type in a Storage Pool NameStorTrends 3200 Set Up Guide StorTrends iTX version 2.7 Step Four Configure SAN Volume Enter Volume Name Enter Volume SizeSelect Thin or Exact Provisioning Select SAN as the Dialect Type Create Target and Target NameStep Five Configure NAS Volume Enter Volume Name Select NAS as the Dialect Type Create Share and Share NameStep Six Summary View and Status Step Seven All Done No Errors