Lincoln Electric IM309-D manual CV Adapter Mounting

Page 11

B-2

INSTALLATION

B-2

 

 

 

FIGURE 1 – CV Adapter Mounting.

3.FOR CODE NUMBERS BELOW 8678, unbolt existing brown field lead from black exciter leads in the lead bundle and bolt it to CV Adapter lead 509 using #10 x 1/4 bolt and nut provided. Tape up con- nection and unused lead terminal on lead 509 (see Figure 2 below).

FOR CODE NUMBERS ABOVE 8678, remove existing brown field lead from black exciter lead on the idler control P.C. board and connect the brown field lead to CV Adapter lead 509 using the exist- ing push-on terminal. Tape up connection and unused ring terminal.

4.FOR CODE NUMBERS BELOW 8678, connect CV Adapter lead 610 to black exciter lead bolted connection shown in Figure 2 and insulate the con- nection with tape. Tape unused lead terminal on lead 610.

FOR CODE NUMBERS ABOVE 8678, tape up ring terminal on CV Adapter lead 610 and connect push-on terminal of CV Adapter lead 610 to black exciter lead on idler control P.C. board that was connected to brown field lead.

5.Remove existing blue field lead from the center ter- minal of the Fine Current Adjustment rheostat and connect it to CV Adapter lead 503 using #10 X 1/4 screw and nut provided. Insulate connection with tape.

6.Connect CV Adapter lead 602 to the center termi- nal of the Fine Current Adjustment rheostat. Connect CV Adapter lead 600 to the end terminal of the Fine Current Adjustment rheostat that has an existing lead connected to it.

7.Connect CV Adapter leads “Neg” and “Pos” to the back of the SA-200 negative and positive output terminals respectively. Tape these leads to gener- ator lead bundle for support.

FIGURE 2 – SA-200 with Roof Assembly Removed.

CV ADAPTER

Page 10 Page 12
Image 11
Page 10 Page 12
Contents CV Adapter TM California Proposition 65 Warnings SafetyElectric Shock can kill Cylinder may explode if damaged Précautions DE Sûreté Thank You Table of Contents Product Purpose General DescriptionGeneral Description K384 CV Adapter to SA-200 Engine Welder InstallationCV Adapter Mounting Installation SA-250 with Roof Assembly Removed Fuel Tank as Viewed from Top Refer to Troubleshooting Section of manual Installation SA-250 with Roof Assembly Removed K384 CV Adapter to Classic I Engine Welder Installation K384 CV Adapter to Classic II Engine Welder Figure a K385-1 Model CV AdapterEngine Welder Left Side Installation Welder Frame WAS RED Installation CV Innershield Welding OperationHOW to USE Troubleshooting Guide 1TROUBLESHOOTINGD-1Recommended Symptoms Course of Action TroubleshootingLiquid Electrolyte in These Capacitors is Toxic Connection Diagram CV Adapter to SA-200 Above Code DiagramsConnection Diagram CV Adapter to SA-200 Below Code S17517 S17766 S17519 With Codes 10601, 10602, 10856, 10884 Connection Diagram CV Adapter to SAE-400 and WELD‘N AIRS24466 M14822 M15198 + E EngineContinental TM27 Engine ClassicClassic II Deutz Engine with Circuit Breakers CSA Remote Control OptionalE12 CV Adapter Schematic Page Precaucion Aviso DE

IM309-D specifications

Lincoln Electric IM309-D is a cutting-edge multi-process welding machine designed to meet the demands of both professionals and hobbyists in various welding applications. This machine stands out in the marketplace due to its innovative features, robust build, and advanced technologies that enhance usability and performance.

One of the main features of the IM309-D is its multi-process capability. The machine can seamlessly switch between MIG, TIG, and Stick welding processes, making it versatile for different welding tasks. This flexibility is particularly valuable in environments where different welding techniques are required for distinct projects.

The IM309-D employs advanced digital controls that offer precise welding parameters and settings adjustment. This level of control enables users to achieve optimal quality in their welds, regardless of the material type or thickness. The intuitive interface makes it user-friendly, allowing even less experienced welders to navigate its features with ease.

In terms of power, the IM309-D is equipped with a robust duty cycle that ensures consistent performance during extended welding tasks. It supports a wide voltage input, allowing it to operate effectively in various industrial or construction site settings. The machine is designed to be energy-efficient, reducing operational costs without compromising performance.

One of the prominent technologies utilized in the IM309-D is its Auto-Set feature. This intelligent technology automatically calculates optimal settings based on the material type and thickness, saving time and minimizing guesswork for the welder. Additionally, it incorporates an advanced cooling system that prevents overheating, ensuring reliability during prolonged use.

Safety is another critical focus of the IM309-D design. The machine features multiple safety mechanisms, including overload protection and thermal shutdown features that protect both the equipment and the operator. The robust construction also ensures durability, making it suitable for rigorous work environments.

Overall, the Lincoln Electric IM309-D stands out for its exceptional combination of versatility, efficiency, and safety. With its advanced technology and user-friendly interface, it is a reliable choice for welders looking to enhance their productivity and achieve superior results in their welding projects. Whether used in a professional shop or a home workshop, the IM309-D delivers impressive performance and value.
Top Page Image Contents