Lincoln Electric IM927 Installation, Welding Output, Auxiliary Power, Height Width Depth Weight

A-1		INSTALLATION				A-1
TECHNICAL SPECIFICATIONS - Weldmark 225 (K2239-4 )
		INPUT - GASOLINE ENGINE
Make/Model	Description	Horsepower	Operating	Displacement	Starting	Capacities
			Speed (RPM)	cu. in.	System
				(cu.cm.)
	2 cylinder		High Idle 3700
	4 Cycle				12VDC
Kohler	Air-Cooled				Battery	Fuel:
	Gasoline	23 HP @			Electric Start
CH23S	Engine.	3600 RPM	Full Load 3500	41(674)	Group 58	9 Gal (34 L)
	Aluminum Alloy	(Kohler)		Kohler	Battery	Lubricating Oil:
	with Cast Iron				(435 cold	2.0 Qts. (1.9 L)
	Liners,		Low Idle 2200		Cranking
	Electronic				Amps)
	Ignition

RATED OUTPUT @ 104°F (40°C) FOR WELDER

Welding Output

AC Constant Current 225A / 25V / 100%

DC Constant Current 210A / 25V / 100%

DC Constant Voltage 200A / 20V / 100%

RATED OUTPUT @ 104°F (40°C) FOR GENERATOR

Auxiliary Power 1

10,500 Watts Peak, 60 Hz AC

9,000 Watts Continuous, 60 Hz AC 120/240 Volts

PHYSICAL DIMENSIONS

HEIGHT	WIDTH	DEPTH	WEIGHT
30.3 in.	19.1 in.	42.3 in.	502 lbs. (228kg)
770 mm	485 mm	1074 mm

1.Output rating in watts is equivalent to volt - amperes at unity factor. Output voltage is within +/-10% at all loads up to rated capacity. When welding available auxiliary power will be reduced.

WELDMARK 225