Lincoln Electric IM622 Installing ThE Optional, Lamp KIT and Automatic START/STOP ARC Sensor

A-13 INSTALLATION A-13

INSTALLING ThE OPTIONAL

LAMP KIT AND AUTOMATIC

START/STOP ARC SENSOR

(continued)

If installing with a 10 ft. or 13 ft. Arm:

Route the 36 ft. connecting cable through the four cable holders in the arm (Fig. 26D). Leave plenty of slack at each hinge (Fig. 26A) (22 in. at the middle hinge).

Secure the cable in the cable holders (Fig. 26-Inset), and use wire ties at the hinge as shown in Fig. 25. Exit the arm through the cable hole in the rotating hinge; use a knife to cut a small X-pattern in the grom- met as shown in Figure 24.

Fig. 25

A B Fig. 26 A

C A

D D D

4x

D

L=min. 22"

(550 mm)

SF2400 STATIONARY FAN