Friedrich SP08A10, SP06A10 Disassembly and Reassembly ProcedureSP10A10/SP12A10, Ass’y Grille

4-3.Disassembly and Reassembly Procedure(SP10A10/SP12A10)

Stop operating the air conditioner, and pull out the power cord before repair.

No.	Part Name	Procedures	Remarks
1	Ass’y Grille	1.Pull the Grille air inlet and Guard air filter out.
		2.Remove the screw on the panel front.
		3.Hold the lower part of panel with two hands
		while pressing down on both sides of the lower
		part of the cabinet, pull it forward by about
		30mm,and then lift it up carefully for
		removal.(Must un-connect the Displayer with
		the controller inside.)
2	Ass’y Cabinet	1.Remove 2 screws on the both side of the
		cabinet.
		2.Pull the front part both side, and remove the
		unit from the cabinet.
3	Ass’y Control	1.Remove the earth screw fixed on the cabinet.
		2.Remove 3 screws fixed on the partition and
		frame up.
		3.Remove the screw fixed for the power cord.
		4.Un-connect the motor wire and comp lead
		wire, then take out the control box upward.
FRIEDRICH AIR CONDITIONING CO.			4-3