ACCESSORIES | ||
|
|
|
OPTIONS/ACCESSORIES AND COM- PATIBLE LINCOLN EQUIPMENT
K957-1 HEAVY DUTY, TWO WHEEL TRAILER FOR SMALL WELDERS
For road,
K1770-1 UNDERCARRIAGE (FACTORY)
For moving by hand on a smooth surface. Heavy duty puncture resistant pneumatic tires & front caster, One or two gas cylinders can be mounted on the rear of the undercarriage with the installation of
For use on
K1745-1 WELDING GAS CYLINDER LPG TANK HOLDER
For use on
K1898-1 SPARK ARRESTOR
Mounts inside exhaust pipe.
K704 ACCESSORY SET - Includes 35 ft. (10m) of electrode cable and 30 ft. (9.1m) of work cable, head- shield, work clamp electrode holder. Cables are rated at 400 amps, 100% duty cycle.
K857 25 ft (7.5m) or
CONTROL
Portable control provides same dial range as the output control on the welder. Has a convenient 6 pin plug for easy connection to the welder.
K1690-1 GFCI RECEPTACLE KIT
Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle with cover and installation instructions. Replaces the factory installed 120V duplex receptacle. Each receptacle of the GFCI Duplex is rated at 20 Amps, the maximum total cur- rent from the GFCI Duplex is limited to the 20 Amps. Two kits are required.
K802N POWER PLUG KIT
Provides four 120 volt plugs rated at 20 amps each and one dual voltage, full KVA plug rated at 120/240 volts, 50 amps.
K802R POWER PLUG KIT
Provides four 120 volt plugs rated at 15 amps each and one dual voltage, full KVA plug rated at 120/240 volts, 50 amps.
K1816-1 FULL KVA ADAPTER KIT
Plugs into the 120/240V NEMA
TIG Welding
K870 Foot Amptrol
KP509 Magnum Parts Kit
Spool Gun
K488 Magnum Control Module
RANGER 305G