Lincoln Electric 2HBG Welding Positions Advantage Lincoln, Typical Applications, Conformance

PIPELINER 6P+ AWS: E6010 Cellulosic All-Position Stick (SMAW) Electrode

Pipeliner 6P+ is an all-position cellulosic pipe electrode designed especially for vertical down root pass welding. This electrode is based on a long-time favorite among cross- country pipeline welders.

•Manufactured under a quality system certified to ISO 9001 requirements.

•Manufactured to actual lot control. Actual certificates of conformance are available upon request.

WELDING POSITIONS

1G	2F	2G
3G➔	3G➔	4G

ADVANTAGE LINCOLN

•All-position; particularly good for vertical and overhead.

•Light slag with little slag interference for easy arc control. Easy slag removal, smooth bead.

•Deep penetration with maximum dilution.

•Capable of x-ray quality welds, even out-of-position.

TYPICAL APPLICATIONS

•Designed especially for all-position vertical down root pass welding.

5G ➔ 5G ➔

CONFORMANCE

AWS A5.1: E6010

ASME SFA-5.1: E6010

CSA W48.01: E41010

EN499: E 42 3 C 25

MECHANICAL PROPERTIES - As Required per AWS A5.1-91

								Charpy V-Notch
	Yield Strength			Tensile Strength			Elongation	ft•lbf (Joules)
	psi (MPa)			psi (MPa)			(%)	@ -20ºF (-29ºC)
Required	48,000 (330)			60,000		(410)	22	20	(27)
AWS E6010 (as-welded)	min.			min.			min.	min.
Typical Results
As-welded	57,000	-	76,000	72,900	-	86,200	24 - 33	38	- 63
	(393	-	524)	(503	-	594)		(51	- 85)
Stress-relieved(1)	51,000	-	64,000	67,000	-	78,000	30 - 34	45	- 53
1 hr @ 1150°F (612°C)	(352	-	579)	(462	-	538)		(61	- 72)

(1)Data provided for information only – not part of AWS classification.

NOTE: Pipeliner electrodes are manufactured under lot control. A Certificate of Test showing actual deposit chemistry and mechanical properties per AWS A5.1 (DC+ only) is available on request from the factory for every lot of electrode.

(Fax 216-383-8386).

DIAMETERS / PACKAGING

TYPICAL OPERATING PROCEDURES

Diameter		10 Lb. (4.5 kg)	50 Lb. (22.7 kg)
in.	(mm)	Easy Open Cans
			Easy Open Cans
		[ 60 lb. (27.2 kg) Master ]

Polarity

Current (Amps)

1/8” 5/32” 3/16”

1/8	(3.2)	ED030845	ED030848
5/32	(4.0)	ED030846	ED030849
3/16	(4.8)	ED030847	ED030850

Manufactured in metric diameters, U.S. Customary sizes are approximate.

DEPOSIT COMPOSITION - As Required per AWS A5.1-91

%C	%Mn	%Si	%S	%P
Requirements
AWS E6010	Not Specified
Typical Results .10-.20	.40-.65	.11-.30 .009-.020		.005-.025

(3.2mm) (4.0mm) (4.8mm)

DC+ 65 - 130 90 - 175 140 - 225

NOTE: This AWS electrode classification is not required to deposit weld metal that is low in diffusible hydrogen. Therefore, these electrodes should not be used in applications where the hydrogen content of the weld metal is required to be controlled.

Pipeliner

8 www.lincolnelectric.com