To start unit, To set mode of operation

920-197-01

How to operate your Friedrich room air conditioner (XQ models)

To start unit

If your air conditioner is installed and plugged into a proper receptacle, it is ready to go. The first time the unit is started, the compressor will delay for three minutes. See Automatic Component Protection on the following page.

1Touch the Power button once. The unit will automatically be in Cool mode with the temperature set at 75°F (24°C) and the fan speed at F1, the sleep setting.

To set mode of operation

When you ¿rst turn the unit on, it will be in the Cool mode (light on), with constant fan.

2	Touch the Mode button once to activate the MoneySaver® (light on).

8 9

2 3 4

Figure 3

Power

		Cool
Fan	Mode	Money Saver®
Speed	Mode
		Fan Only
		Clock
Timer	Set	Start Time
On/Off	Hour

MoneySaver® is a feature that cycles the fan with the compressor

so that the fan does not run all the time. This saves energy and

improves dehumidi¿cation. Or you may prefer constant fan for more

air movement (to return to constant fan, touch the Mode button two

more times).

In order to run the fan by itself, do the following:

3 Continuing from MoneySaver® mode (light on), touch the Mode button

once to activate the FAN ONLY feature (light on).

Stop Time

13 10 11 12

To set the hour clock

Temp/Hour

5 6

The FAN ONLY setting will circulate air in the room without the com-

pressor coming on.

To adjust temperature

4Use the Mode button to select either the COOL or MoneySaver® function

5COOLER – Touch the button to lower the room air temperature.

6WARMER – Touch the button to raise the room air temperature.

7Press both the and buttons at the same time to switch the temperature readout from Fahrenheit (°F) to Celsius (°C).

Repeat step 7 to switch from °C back to °F.

To adjust fan speed

8Touch the Fan Speed button to see the current setting. Touch it again to change speed. F1 is the lowest setting (SLEEP SETTING / LOW), F2 is MEDIUM, and F3 is HIGH.

To activate Smart Fan

9There is a fourth option, SF, when selecting the fan speed. This is the SMART FAN function. SMART FAN DOES NOT OPERATE IN CONJUCTION WITH THE FAN ONLY MODE.

10Touch the Set Hour button to see the current setting (clock light comes on). The number that is displayed is the approximate time

(hour only). Use the and buttons to change the settings. BE SURE TO SET A.M. AND P.M. ACCORDINGLY. (P.M. is indicated by a red light in the upper left corner of the display).

To set the timer

NOTE: Set the HOUR CLOCK before attempting to set timer functions.

You can set the START and STOP times a minimum of one hour apart, and a maximum of twenty-three hours apart.

11After setting the time, press the Set Hour button once (Start light

comes on). Use the and buttons to select the time that the unit will START.

12After selecting the START time, press the SetHourbutton once more

(Stop light comes on). Use the and buttons to select the time that the unit will STOP. After selecting the stopping time, press the Set Hour button once.

13Press the Timer On/Off button (light turns on) to activate the timer function. To deactivate this function, press the Timer On/Off button once again (light turns off). Once the on and off times have been selected, they will remain in memory and cycle daily until changed.

NOTE: If the unit is unplugged or the power is interrupted, the HOUR must be reset or the Timer On/Off will not function when desired.

Automatic component protection

Smart Fan will adjust the fan speed automatically to maintain the desired comfort level. For example, if the outside doors in your home are opened for an extended period of time, or more people enter a room, Smart Fan may adjust to a higher fan speed to compensate for the increased heat load. This keeps you from having to adjust the fan speed on your own.

Your unit is equipped with Automatic Component Protection. To protect the compressor of the unit, there is a three minute start delay if you turn the unit off or if power is interrupted. The fan operation will not be affected. Also, if you switch from Cool mode to Fan Only, and switch back to Cool mode, there is a three minute delay before the compressor comes back on.

EQ08, YQ07 specifications

Friedrich EQ08 and YQ07 are two prominent air conditioning units that exemplify modern cooling technology. Known for their efficient performance and user-friendly features, these models are popular choices among consumers aiming to enhance indoor comfort.

The Friedrich EQ08 is notable for its compact design, making it suitable for various room sizes, especially in urban settings where space may be limited. With a cooling capacity of 8,000 BTU, the EQ08 can effectively cool rooms up to 350 square feet. Its energy efficiency is highlighted by the use of Energy Star-rated components, enabling reduced energy consumption and lower utility bills.

One of the key features of the EQ08 is its Quiet Master technology. This innovation ensures that the unit operates at minimal noise levels, allowing for a peaceful environment, whether it’s during the day or night. Additionally, the EQ08 comes equipped with a programmable timer and remote control, giving users the flexibility to set cooling schedules according to their preferences.

In contrast, the Friedrich YQ07 stands out with its advanced climate control capabilities. Offering a cooling capacity of 7,000 BTU, the YQ07 can efficiently cool spaces of similar size while focusing on smart technology integration. This model features a digital thermostat that allows for precise temperature adjustments, enhancing user comfort.

The YQ07 is engineered with a unique three-speed fan that provides customized airflow, ensuring even distribution of cool air across the room. An additional characteristic is its built-in Wi-Fi capability, enabling users to control the unit remotely through a smartphone app. This feature represents a significant advancement in convenience, allowing individuals to monitor and adjust their cooling preferences from anywhere.

Both models are designed with ease of installation in mind, featuring lightweight constructions and straightforward mounting systems. They also include washable filters, which contribute to better indoor air quality and ease of maintenance.

In summary, the Friedrich EQ08 and YQ07 embody significant advancements in air conditioning technology. With a focus on energy efficiency, quiet operation, and smart features, they cater to modern consumers looking for reliable and effective cooling solutions. Whether choosing the EQ08 for its compact design or the YQ07 for its advanced features and smart functionality, both units provide effective climate control that meets the demands of contemporary living.