SAVE THESE INSTRUCTIONS
e_ = A •
CONNECTING TOOL ATTACHMENT TO THE POWER HANDLE
Be sure to follow the following safety precautions when attaching and detaching tools from the power handle.
Remove the battery from the handle before attaching or detaching tools. Never touch the control switches on the power handle when attaching and detaching tools.
Please refer to the instruction manual for the Power Handle for proper operation of the Power Handle, battery and charger.
To attach a tool:
1.Twist the lock ring on the power handle to the unlocked position. (see figure 1)
Figure 1
2.Insert the male end of the power handle interface into the female socket
in the end of the tool attachment
making sure that it is firmly seated. (see figure 2) The interface is keyed so that it will only go together one way. The handle and tool should go together easily. If you experience resistance in putting them together, check that the keys on the handle are
properly aligned with the slots in the tool.
Figure 2
3.Grasp the tool attachment firmly
with one hand (note, do not grasp on a rotating part such as the auxiliary handle), and twist the lock ring on the power handle to the locked position with the other hand. (see figure 3)
Figure 3
To detach a tool:
1.Grasp the tool attachment firmly
with one hand (note, do not grasp on a rotating part such as the auxiliary handle), and twist the lock ring on the power handle to the unlocked position with the other hand. (see figure 4)