ASSEMBLY
Contents of Carton
1 - Air Compressor
1 - Air Hose
1 - Inflator Accessory Kit
Tools Required for Assembly
1 - 9/16" open end wrench or adjustable wrench
1 - adjustable wrench
Unpacking
1.Remove unit from carton and discard all packaging. NOTE: Save all parts bags.
Assemble Hose
1.Assemble hose to air outlet. IMPORTANT: The hex fitting on the air outlet MUST be held in place with a wrench when tightening hose onto air outlet.
Assemble Accessories
Choose the accessory needed.
Assemble Female Tire Chuck
1.Assemble female tire chuck to hose and tighten securely with wrenches.
Female Tire
Tapered Chuck
Nozzle
Blow Gun
Adapter
Hose
End
Inflating
NeedleHose
Adapter
Extension Tube
Assemble Other Accessories
1.Attach the hose adapter to hose.
2.Choose the needed accessory. Attach the tapered nozzle, extension tube, or blow gun adapter to the hose adapter. The inflating needle attaches to the blow gun adapter. NOTE: The tapered nozzle, extension tube, and blow gun adapter can also be attached to a blow gun (sold separately, not shown).
D29495 | 10- ENG |