Anton/Bauer DUAL 2702, QUAD 2702 owner manual Autocal Feature

Page 12

When testing is completed, the LCD Main Display will indicate “TEST DONE”. To display or print test results:

1.Press the DISPLAY button on the PowerCharger front panel to scroll to the Primary Position Display for the battery tested.

2.Press the TEST button. The LCD will display the capacity of the battery in ampere hours. If a printer is attached, performance data will simultaneously be printed out with all battery identification information. Consult your battery owners manual for warranty information and cell capacity ratings.

Remove battery only when test data has been viewed or printed. Test data is retained only while the battery is on the PowerCharger. Once battery is removed, data is no longer available.

“AUTOCAL” Feature

When a DDM is installed in the PowerCharger, a special InterActive mode is automatically enabled for DIGITAL batteries placed on the PowerCharger at any time. The PowerCharger will interrogate the status of the DIGITAL battery to determine whether the battery has received a “learning” cycle or “calibrate” cycle within certain parameters. This “learning” typically occurs in normal equipment operation, however, if the battery has not been fully charged and discharged in some time, a “double arrow” or “calibrate” indication will appear on the battery. The DIGITAL battery will continue to function normally with this indication. It is a request by the battery to fully charge and discharge the battery to the “EOD” point at the next opportune time so that the battery can verify its capacity. See DIGITAL battery Owner’s Manual for complete description of this indication.

The PowerCharger with DDM will detect a request from the DIGITAL battery and automatically enter an AUTOCAL mode when the battery is placed on the charger. This mode is indicated by the PowerCharger with an audible alert and a message in the LCD advising that the AUTOCAL routine has been called. This mode can be canceled, for example, if time constraints do not allow for the test to be completed. The mode is identical to the charge-discharge-charge previously described.

The AUTOCAL mode can be canceled by following the prompts appearing in the LCD, using the TEST button to cancel the test. If the test is not canceled, it will commence automatically.

When the AUTOCAL operation is complete, the battery will be fully charged and ready for use.

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents PowerCharger Table of Contents Standard Features IntroductionImportant Notice Safeguards Fuse TYPE/REPLACEMENTGROUNDING/EARTHING OperationCharging ApplicationsThree Stage Charging Methodology Wait 2-READY 3-CHARGE 4-READY PropacVCO LED Indications LED Indication MeaningPriority Battery Priority Battery FunctionDDM DIAGNOSTIC/DISCHARGE Module Standard on Model Dual 2702 and QuadTo Operate The PowerCharger with DDM Autocal Feature Camera Power Mode is on Batteries not Charging Operation AS DC Camera Supply from MainsPower Down Power Loss Memory ModeFCC Notice Warranty

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.
Top Page Image Contents