Anton/Bauer QUAD 2702, DUAL 2702 owner manual LED Indications, LED Indication Meaning

Page 9

LED Indications

Each charge position of a PowerCharger has a pair of LEDs (one red, one green) which indicate the status of the battery attached to that position. The following table identifies all of the PowerCharger LED indications and their meaning:

LED INDICATION

MEANING

 

 

Alternating

Indicates that the PowerCharger is evaluating the battery and/or

Red & Green

communicating with a DIGITAL battery, loading battery

 

parameters and determining the appropriate charge routine. A

 

low voltage (<11V) battery will cause this indication to continue

 

until the battery is “rejuvenated” to a safe charging voltage.

 

NOTE: This indication will continue if a non-Anton/Bauer Logic

 

Series battery is mounted on the charger. These batteries cannot

 

identify themselves to the PowerCharger and will not be charged.

Steady Red

Indicates that the battery is being held by the PowerCharger

 

EITHER in line to charge, to stabilize an out-of-range temperature

 

condition, or to await discharge in test mode with a DDM module

 

installed.

Flashing Red

Indicates that the battery is currently under Stage One charge-

 

Charging (Primary).

Flashing Green

Indicates that the battery is currently under Stage Two charge-

(slow rate)

Ready (Secondary).

Flashing Green

Indicates a fully charged DIGITAL battery is placed on the

(fast rate)

charger and a FUL cutoff condition cannot be met. The charger

 

is VERIFYING that the battery is in a full charge condition.

Steady Green

Indicates that the battery is READY and in Stage Three Lifesaver

 

mode.

NOTE: In some cases, a battery may be discharged to a very low voltage level at which the battery is unrecognizable to the charger when first attached. In this case, no indications will appear on the LED (or LCD) display. Each PowerCharger constantly looks for such batteries, applying small, safe amounts of charge current to each empty charge position. This search mode occurs whenever the charger is NOT occupied in a Stage One mode on another position. If the charger is otherwise busy, it will search only occasionally for such batteries and the position may have no LED or LCD indication. This is normal. The charger will properly identify and address the position when the other batteries have completed Stage One.

7

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PowerCharger Table of Contents Introduction Standard FeaturesImportant Notice Fuse TYPE/REPLACEMENT SafeguardsGROUNDING/EARTHING OperationApplications ChargingThree Stage Charging Methodology Wait 2-READY 3-CHARGE 4-READY PropacVCO LED Indication Meaning LED IndicationsPriority Battery Function Priority BatteryDDM DIAGNOSTIC/DISCHARGE Module Standard on Model Dual 2702 and QuadTo Operate The PowerCharger with DDM Autocal Feature Operation AS DC Camera Supply from Mains Camera Power Mode is on Batteries not ChargingPower Down Power Loss Memory ModeFCC Notice Warranty

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.
Top Page Image Contents