Anton/Bauer QUAD 2702, DUAL 2702 owner manual Camera Power Mode is on Batteries not Charging

Page 13

OPERATION AS DC CAMERA SUPPLY FROM MAINS

Each PowerCharger model can operate cameras and camcorders using the four pin camera output connector located at the back of the PowerCharger. To power the camera, attach one end of the XLR4 accessory cable (available separately) to the PowerCharger. Attach the other end to the “DC in” four pin XLR on the camera/camcorder. Disconnect the charge module accessory from the PowerCharger. Move the switch located next to the connector to the “CAMERA” position. A message will appear in the PowerCharger LCD:

CAMERA POWER MODE IS ON

BATTERIES NOT CHARGING

The PowerCharger will remember the point at which it left its charge routine for any battery on the charger. When the switch is returned to the “CHARGER” position, the batteries will automatically continue charging where they left off.

During camera operation, with batteries on the PowerCharger, the unit will indicate a flashing GREEN LED for any battery position which is more than 50% charged. Batteries less the 50% charged will have no indication.

Application Note: The 2700 DUAL and QUAD Model PowerChargers have a maximum 70 watts output. It should be noted that, in general, due to camera turn-on surges, operation of zoom lenses and tape ejection mechanisms that the 2700 series PowerChargers should be used on equipment with operating specifications of more than 25 watts.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PowerCharger Table of Contents Introduction Standard FeaturesImportant Notice Fuse TYPE/REPLACEMENT SafeguardsGROUNDING/EARTHING OperationApplications ChargingThree Stage Charging Methodology Propac Wait 2-READY 3-CHARGE 4-READYVCO LED Indication Meaning LED IndicationsPriority Battery Function Priority BatteryDDM DIAGNOSTIC/DISCHARGE Module Standard on Model Dual 2702 and QuadTo Operate The PowerCharger with DDM Autocal Feature Operation AS DC Camera Supply from Mains Camera Power Mode is on Batteries not ChargingPower Loss Memory Mode Power DownFCC Notice Warranty

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.
Top Page Image Contents