Anton/Bauer DUAL 2702, QUAD 2702 owner manual Wait 2-READY 3-CHARGE 4-READY, Propac, Vco

Page 8

LCD Indications

Each PowerCharger’s liquid crystal display (LCD) will display the status of each battery, as well as, important PowerCharger operating indications. The following information explains the indications which appear in the LCD.

The levels of the LCD display on each PowerCharger can be obtained by pressing the DISPLAY, or in some cases TEST, button on the PowerCharger front panel.

1 - - - - - - - 2 - - - - - - -

The Main Display shows the general status of each battery mounted to the PowerCharger. This display is immediately returned to following self test and after viewing any other screen.

1 - - - - - - -

2 - - - - - - -

3 - - - - - - -

4 - - - - - - -

Both the two position (above) and four position Main Displays will show a series of dashes when a battery has not been mounted to the PowerCharger.

1—WAIT 2—READY 3—CHARGE 4—READY

The Main Display of the PowerCharger will show the abbreviated status of each battery on the main unit.

DUAL 2701 Rev. #3.xx

Discharger NOT INSTALLED

The Signature Display can be viewed by pressing and holding the TEST button from the Main Display on the PowerCharger to obtain model information, Software revision number and installation of DDM (discharger).

1—Waiting to Charge

PROPAC 14

16.5 V

The Primary Position Display is obtained by pressing the DISPLAY button repeatedly until the position number for the battery desired is displayed. This view further identifies the status of the battery, its model number (chemistry and voltage), as well as current battery voltage.

2—READY (Lifesaver) 4.0 PROPAC 14D 100% 16.5 V

The Primary Position Display will additionally display the available capacity when a DIGITAL

battery is used, both in percent and in ampere hours.

2—Ser# 96280 Mar98

4.0

118 cycles

VCO

27oC

 

 

 

The Secondary Position is obtained by pressing and holding the DISPLAY button while viewing the primary position display. This Secondary display is available only with DIGITAL batteries and is used to obtain information transmitted from the battery to the charger including battery serial number, date of manufacture, number of cycles, “learned” capacity, type of stage one charging cut-off experienced and battery temperature.

6

Image 8
Contents PowerCharger Table of Contents Standard Features IntroductionImportant Notice Safeguards Fuse TYPE/REPLACEMENTGROUNDING/EARTHING OperationCharging ApplicationsThree Stage Charging Methodology VCO Wait 2-READY 3-CHARGE 4-READYPropac LED Indications LED Indication MeaningPriority Battery Priority Battery FunctionDDM DIAGNOSTIC/DISCHARGE Module Standard on Model Dual 2702 and QuadTo Operate The PowerCharger with DDM Autocal Feature Camera Power Mode is on Batteries not Charging Operation AS DC Camera Supply from MainsFCC Notice Power DownPower Loss Memory Mode Warranty

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.