Anton/Bauer DUAL 2702, QUAD 2702 owner manual Power Down, Power Loss Memory Mode, FCC Notice

Page 14

POWER LOSS MEMORY MODE

The PowerCharger features a special Power Loss Memory or “Power Down” mode. When mains power is interrupted while batteries are mounted, the PowerCharger will automatically indicate the charge status of all batteries until power is restored (up to 16 hours). When power is interrupted, an audible alert will be heard every 30 seconds for 30 minutes to notify the operator if power has been inadvertently removed. The LCD will display the message “POWER DOWN MODE” along with a counter which will indicate time since mains power has been lost.

During “POWER DOWN MODE”, batteries more than 50% charged will be indicating by a flashing RED LED. Batteries fully charged will be indicated by a

POWER DOWN

00:00:00

flashing GREEN LED. A battery less than 50% charged will show no indication.

When AC power is restored, the PowerCharger will automatically replenish the power taken from the batteries during Power Down and resume charging each battery in the mode and order when mains power was interrupt.

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

This equipment has been approved by one or more agencies. All changes and/or modifications not expressly approved by Anton Bauer, Inc. could void the users’ warranty and authority to operate this equipment. There are no serviceable parts in this equipment.

12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents PowerCharger Table of Contents Standard Features IntroductionImportant Notice GROUNDING/EARTHING SafeguardsFuse TYPE/REPLACEMENT OperationCharging ApplicationsThree Stage Charging Methodology VCO Wait 2-READY 3-CHARGE 4-READYPropac LED Indications LED Indication MeaningDDM DIAGNOSTIC/DISCHARGE Module Priority BatteryPriority Battery Function Standard on Model Dual 2702 and QuadTo Operate The PowerCharger with DDM Autocal Feature Camera Power Mode is on Batteries not Charging Operation AS DC Camera Supply from MainsFCC Notice Power DownPower Loss Memory Mode Warranty

DUAL 2702, QUAD 2702 specifications

Anton/Bauer is a leading name in battery technology, especially renowned for its line of professional camera batteries and chargers. Among its standout products are the QUAD 2702 and DUAL 2702 battery chargers, specifically designed for the demanding needs of the broadcast and film industries. Both models provide reliable charging solutions to keep your camera equipment powered throughout rigorous shooting schedules.

The Anton/Bauer QUAD 2702 is a sophisticated four-position charger that caters to multiple battery types, including Gold Mount and V-Mount batteries. One of its primary features is the ability to charge two batteries at a time, significantly enhancing workflow efficiency. The charger uses advanced smart charging technology that automatically detects the chemistry of the attached batteries, optimizing the charging process for maximum performance and longevity.

Built with durability in mind, the QUAD 2702 features a rugged casing that withstands the rigors of on-set use. Additionally, its integrated LED indicators display the charging status of each battery, allowing users to monitor multiple batteries at a glance.

The DUAL 2702, while similar in many ways to its quad counterpart, offers charging capabilities for two batteries simultaneously. This makes it an ideal choice for smaller production teams or operators who might not require the full capacity of the QUAD model. Like the QUAD 2702, it also features an advanced charging algorithm that maximizes battery life, ensuring that professional videographers get the most out of their investment.

Both chargers are designed with versatility in mind. They are compatible with a wide range of Anton/Bauer batteries, making them an essential tool for any filmmaker or photographer. The DUAL and QUAD 2702 units also come equipped with a power supply circuit that can handle a wide range of input voltages, allowing them to be used in various locations around the world without issue.

In summary, the Anton/Bauer QUAD 2702 and DUAL 2702 battery chargers represent the pinnacle of professional battery charging solutions. With their robust construction, advanced charging technologies, and user-friendly design, they are invaluable assets for any audio-visual production team. Whether you're shooting on location or in a studio, these chargers ensure your equipment remains powered, allowing you to focus on what matters most: capturing stunning visuals.
Top Page Image Contents