Zebra Technologies ZQ110 manual =3 Error status

ZQ110

					n=3: Error status
	Bit	Off/On	Hex	Decimal	Function
	0	Off	00	0	Fixed
	1	On	02	2	Fixed
	2	Off	00	0	Fixed
	3	Off	00	0	Fixed
	4	On	10	16	Fixed
	5	Off	00	0	Fixed
	6	Off	00	0	Fixed
	7	Off	00	0	Fixed
					n=4: Continuous paper sensor status
	Bit	Off/On	Hex	Decimal	Function
	0	Off	00	0	Fixed
	1	On	02	2	Fixed
	2	Off	00	0	Fixed
	3	Off	00	0	Fixed
	4	On	10	16	Fixed
	5	Off	00	0	Paper end sensor; paper present
		On	20	32	Paper end sensor; paper not present
	6	Off	00	0	Paper end sensor; paper present
		On	40	64	Paper end sensor; paper not present
	7	Off	00	0	Fixed
[Notes]	• This is a status request command to determine if the printer is off-line or
	if an error condition has occurred. Take the following into consideration:

•If this command interrupts the code string of another command, this command is processed as a parameter of the other command; therefore, the print result will not be correct.

•If a command such as graphics data or defined data has a code string that is the same as a code string in a parameter, the printer processes and then continues with the bit-image or other command.

•This command following DLE can be executed in real-time command mode.

•This command is ignored when transmitting block data (Header ~ NUL).

Rev. 1.00 - 10 - Mobile Printer Command Manual