Zebra Technologies ZQ110 manual Function 381 GS k pL pH cn fn m Fn=81 Format

Page 51

ZQ110

<Function 381> GS ( k pL pH cn fn m

(fn=81)

[Format]

ASCII

GS

(

k

pL

pH

cn

fn

m

Hex

1D

28

6B

03

00

33

51

m

Decimal

29

40

107

3

0

51

81

m

[Range]

(pL + pH x 256) = 3 (pL=3, pH=0)

cn=51

fn=81

m=48

[Description]

[Notes]

Encodes and prints DATAMATRIX symbol data saved in the storage area

▪This function is used in regular mode when the printer is at the first line or no data is present in the printer buffer.

▪If the size of any one symbol is larger than the print area, printing cannot be done.

▪If any of the following errors is present in the symbol storage area, printing cannot be done:

-There is no data. (Function 380 cannot be executed)

-The number of alphanumeric characters exceeds 2334.

-The number of 8bit byte characters exceeds 1558.

-The number of numeric characters exceeds 3116.

▪DATAMATRIX uses ECC 200 symbols.

▪In the detection and correction of errors, DATAMATRIX uses the Reed- Solomon algorithm.

▪The following data is automatically added during the encoding process:

-Position pattern

-Error correction code text

-Mode separator

-Pad code text

▪During symbol printing, the printer mode has no effect (bold, underline, reverse direction, contrast).

▪In regular mode, this command supplies enough paper required for symbol printing. If the paper supply is not sufficient, the paper supply command is executed. When printing, the printing position is to the left of the print area. After symbol printing, the printer returns to the start position of the line, and the buffer is emptied.

[Example]	▪ Input:
	0x1d 0x28 0x6b			0x03	0x00	0x33 0x43 0x05
	0x1d 0x28 0x6b			0x1b 0x00		0x33	0x50 0x30
	0x5a 0x51 0x31			0x31	0x30	0x5f 0x5a 0x65 0x62 0x72
	0x61	0x20	0x54	0x65	0x63	0x68	0x6e 0x6f 0x6c 0x6f
	0x67	0x69	0x65	0x73
	0x1d 0x28 0x6b			0x03	0x00	0x33	0x51 0x30
	0x0a

Rev. 1.00

- 51 -

Mobile Printer Command Manual

Image 51

Contents ZQ110 ZQ110 ZQ110 Proprietary Statements Canadian Compliance Statement Copyrights ESC G EOTCan ESCGS T GS BGS H GS LLSB ZQ110 Control Commands DetailsAscii EOT Control Commands Details=3 Error status Ascii Hex Decimal Description This command is ignored CR DLE Ascii DLEAscii Can Ascii ESC ESC SPName Select print modes Format ESC $ Name Select bit image mode Format Name Turn underline mode on/off Format Name Select default line spacing Format NUL ESC =ESC @ ESC DESC E Name Turn double-strike mode on/off Format ESC L ESC M When MSR set to Track 1/2 Read mode41H ~ 48H 65 ~ Byte Name Select an international character set Format ESC S Name Select print direction in page mode Format ESC W ESC ＼ ASC ESC ESC d Name Print and feed n lines Format ESC t Name Select character code table Format Name Turns upside-down printing mode on/off Format Name Select character size Format ZQ110 Output GS a Name Execute test print Format ZQ110 Function 112 GS F pL pH m aL aH bL bH =112 Format Datamatrix Function 065 GS k pL pH cn fn n Fn=65 Format Function 067 GS k pL pH cn fn n Fn=67 Format ZQ110 Function 080 GS k pL pH cn fn m d1...dk Fn=80 Format ZQ110 Output Function 165 GS k pL pH cn fn n1 n2 Fn=65 Format Function 169 GS k pL pH cn fn n Fn=69 Format Function 181 GS k pL pH cn fn m Fn=81 Format ZQ110 Function 367 GS k pL pH cn n Fn=67 Format Function 381 GS k pL pH cn fn m Fn=81 Format UPC-E UPC-AFunction 466 GS k pL pH cn fn n Fn=66 Format EAN-8 UCC/EAN-128&CC-A/BUCC/EAN-128&CC-C ZQ110 Output Function 565 GS k pL pH cn fn n Fn=65 Format Function 567 GS k pL pH cn fn n Fn=67 Format Function 581 GS k pL pH cn fn m Fn=81 Format ZQ110 Function GS E pL pH fn d1 d2 fn=1 Format MSW Khmer MSW2255 ZQ110 Function 4 GS E pL pH fn a Fn=4 Format GS L, GS 8 L Name Select graphics data Format Function 48 GS L pL pH m fn fn=0 Format Function 51 GS L pL pH m fn fn=3 Format NAK Dkb Hex ZQ110 Name Turns white/black reverse printing mode on / off Format ZQ110 Name Transmits printer ID Format GS I b Name Transmits battery status Format Name Set left margin Format GS T Name Set printing area width Format ZQ110 Name Execute macro Format Decimal GS f Name Select font for HRI characters Format GS h Name Selects bar code height Format Range of k Range of d NUL AsciiZQ110 CODE39, ITF, Codabar BS L a Name Change receipt mode Format BS M S PL PH fn2 m d1~dk Name Set Start characters Format 0DH 0AH StartUS US Name Get B/T configuration Format US US p Name Set B/T configuration Format 0x31 33H, 31H Reference for requesting Waln configuration 0PEAP Reference for setting Wlan configuration Success

Related manuals

Manual 25 pages 9.07 Kb

Manual 37 pages 60.31 Kb

Manual 12 pages 26.13 Kb