Zebra Technologies ZQ110 manual Function 51 GS L pL pH m fn fn=3 Format

								ZQ110
<Function 51> GS ( L pL pH m fn (fn=3, 51)
[Format]	ASCII	GS		(	L	pL	pH	m	fn
	Hex	1D		28	4C	pL	pH	m	fn
	Decimal	29		40	76	pL	pH	m	fn
[Range]	(pL + pH x 256) = 2 (pL=2, pH=0)
	m=48, fn=3, 51
[Description]	Transmits the number of bytes of remaining memory (unused area) in the
	NV user memory.
			Hexadecimal			Decimal		Amount of Data
	Header			37H		55		1 byte
	Flag			31H		49		1 byte
	Data		30H – 39H			48 - 57		1 - 8 bytes
	NUL			00H		0		1 byte

▪The number of bytes of remaining memory is converted to character codes corresponding to decimal data, then transmitted from the MSB.

▪The data length is variable

<Function 64> GS ( L pL pH m fn d1 d2				(fn=64)
[Format]	ASCII	GS	(	L	pL	pH	m	fn	d1	d2
	Hex	1D	28	4C	pL	pH	m	fn	d1	d2
	Decimal	29	40	76	pL	pH	m	fn	d1	d2
[Range]	(pL + pH x 256) = 4 (pL=4, pH=0)
	m=48
	fn=64
	d1=75, d2=67
[Description]	Transmits the defined NV graphics key code list.

- When the key code is present:

	Hexadecimal	Decimal	Amount of Data
Header	37H	55	1 byte
Flag	72H	114	1 byte
Status	40H or 41H	64 or 65	1 byte
Data	30H - 39H	48 - 57	2 - 80 bytes
NUL	00H	0	1 byte
- When the key code is not present :
	Hexadecimal	Decimal	Amount of Data
Header	37H	55	1 byte
Flag	72H	114	1 byte
Status	40H	64	1 byte
NUL	00H	0	1 byte

▪If the number of the key code exceeds 40, the key code is transmitted dividing up to 40.

-The status if the continuous transmission data block is present is 41H.

-The status if the continuous transmission data block is not present is 40H.

Rev. 1.00 - 68 - Mobile Printer Command Manual