|
|
|
|
|
|
|
| ZQ110 | ||
|
|
|
|
|
|
|
|
|
|
|
<Function 48> GS ( L pL pH m fn (fn=0, 48) |
|
|
|
|
|
|
| |||
[Format] | ASCII | GS | ( | L | pL | pH | m |
| fn |
|
| Hex | 1D | 28 | 4C | pL | pH | m |
| fn |
|
| Decimal | 29 | 40 | 76 | pL | pH | m |
| fn |
|
[Range]
[Description]
(pL + pH x 256) = 2 (pL=2, pH=0) m=48, fn=0, 48
Transmits the total capacity of the NV
| Hexadecimal | Decimal | Amount of Data |
Header | 37H | 55 | 1 byte |
Flag | 30H | 48 | 1 byte |
Data | 30H - 39H | 48 - 57 | 1 - 8 bytes |
NUL | 00H | 0 | 1 byte |
▪The total capacity data is converted to character codes corresponding to decimal data, then transmitted from the MSB.
<Function 50> GS ( L pL pH fn (fn=2, 50)
[Format] | ASCII |
| GS | ( |
| L | pL | pH | m | fn |
|
| Hex |
| 1D | 28 |
| 4C | pL | pH | m | fn |
|
| Decimal |
| 29 | 40 |
| 76 | pL | pH | m | fn |
|
[Range] | (pL + pH x 256) = 2 (pL=2, pH=0) |
|
|
|
|
|
| ||||
| m=48, fn=2, 50 |
|
|
|
|
|
|
|
|
|
[Description]
[Notes]
This command prints the graphics data defined by the process of Function 112.
▪The graphics data stored in the printer buffer is printed.
▪This command is available in standard mode, not in page mode.
▪The graphics data is defined by Function 112.
▪The required amount of line feed pitch is used for printing graphics data, regardless of the existing setting value of the pitch.
Rev. 1.00 | - 67 - | Mobile Printer Command Manual |