ZQ110
<Function 112> GS ( F pL pH m aL aH bL bH | (m=112) |
|
|
|
|
|
| |||||
[Format] | ASCII | GS | ( | F | pL | pH | m | aL | aH | bL | bH |
|
| Hex | 1D | 28 | 46 | 05 | 00 | 70 | aL | aH | bL | bH |
|
| Decimal | 29 | 40 | 70 | 5 | 0 | 223 | aL | aH | bL | bH |
|
[Range] | (pL + pH × 256) = 5 (pL = 5, pH = 0) |
|
|
|
|
|
|
| ||||
| m = 112 |
|
|
|
|
|
|
|
|
|
|
|
| 0 ≤ (aL + aH × 256) ≤ 65535 (0 ≤ aL ≤ 255, 0 ≤ aH ≤ 255) |
|
|
|
| |||||||
| 0 ≤ (bL + bH × 256) ≤ 65535 (0 ≤ bL ≤ 255, 0 ≤ bH ≤ 255) |
|
|
|
| |||||||
[Default] | aL = 141, aH = 0 (BM height(top of a BM ~ bottom of BM): 20 mm) |
|
| |||||||||
| bL = 20, bH = 11 (BM interval(top of a BM ~ top of next BM): 400 mm) |
|
| |||||||||
[Description] | ▪ This command sets the black mark paper format. |
|
|
|
|
|
-pL, pH specifies (pL + pH × 256) as the number of bytes after pH (m, aL, aH,bL, bH).
-aL, aH specifies [(aL + aH × 256) × vertical motion units] as the BM height.
-bL, bH specifies as [(bL + bH × 256) × vertical motion units] as the BM interval.
[Notes] | ▪ The available BM height ranges from 4 to 20 mm. |
| ▪ If the BM height specified is out of range, this command is ignored. |
| ▪ The BM interval ranges from 40 to 400 mm. |
| ▪ If the BM interval specified is out of range, this command is ignored. |
Rev. 1.00 | - 39 - | Mobile Printer Command Manual |