ZQ110
WLAN configuration
[Name] | WLAN configuration command |
[Description] ‘Start Message’ is necessary before sending command via USB interface.
Start Message | Value | Direction |
Message | 7FH, 1DH, 1FH, 03H | Host → Printer |
|
|
|
Response | 7FH, 03H | Printer → Host |
|
|
|
▪ When sending the Configuration command to the printer via USB interface, all Bytes should be converted to 2 Bytes data.
- For example, When sending “_1A” command,
Character | Hexadecimal | Divide | 2 Byte data |
‘_’ | 0x5F | 5, F | 35H, 46H |
|
|
|
|
‘1’ | 0x31 | 3, 1 | 33H, 31H |
|
|
|
|
‘A’ | 0x41 | 4, 1 | 34H, 31H |
|
|
|
|
▪ [0x03] 1Byte should be added to last command
*When using WLAN for configuration, ‘Start Message’ and 2Bytes data converted from 1byte are not necessary.
Rev. 1.00 | - 93 - | Mobile Printer Command Manual |