Installation

Key Installation Points

The Power Switch must be turned OFF before you begin.

1.Observe proper polarity when connecting batteries. Reverse DC polarity will result in damage to the unit and will void the warranty. Use care when making the DC connections.

2.Do not back-feed the AC output of the inverter with incoming AC power. A back-feed occurs when AC power from shore power or generator is connected to the output of the inverter. This will damage the inverter and void the warranty. Remem- ber that incoming AC must be fed only to the AC input and never to the AC output. Always check for AC voltage before con- necting wires to the AC output. Do NOT turn the inverter ON until all AC connections have been made. Back-feeding the inverter voids the warranty.

3.Do not connect the AC input to the AC output. In effect, this would be plug- ging the battery charger into the inverter. This could occur if the unit is connected to the entire leg of a circuit breaker panel, then a circuit breaker on that leg is used to feed the battery charger. This will cause the unit to oscillate ON and OFF when the unit is in inverter mode.

4.Always use proper wire and con- nectors. The proper battery cable size is critical because considerable amperage flows in the DC circuit. Fusing the positive

DC cable is required. The AC wire size is dependant on potential current in the circuit. Consult the NEC (National Electric Code) for proper wire gauge.

5.Keep the inverter/charger out of the elements and out of direct contact with water or spray. Remember that the unit is a piece of electronic equipment and treat it accordingly.

6.Mount the unit as close to the batteries as possible but not in the pres- ence of flammable fumes or in an enclosed battery compartment.

7.The connectors for the remote control and the chassis ground bonding lug, as well as for the AC wires, are lo- cated on the bottom of the unit. Be sure to make these connections before bolting the unit down.

8.You may mount the unit horizon- tally (on a shelf) or vertically (on a wall or bulkhead). If mounted vertically, you must orient the unit so the switch and the circuit breakers are facing up and the fan and battery cables are facing down.

9.Allow several inches of clearance around the unit and allow for a supply of fresh air to the cooling fan. Do not block any of the vents or louvers. The fan pulls air from outside the unit. It blows air across the internal components, particularly the transformer and heat sinks, then out the side vents.

90-0115-00 10/97 Fltman.pm65

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.