Xantrex Technology 2000, 2500 owner manual Troubleshooting, Led

Page 35

TROUBLESHOOTING

LED

Indication

Number

 

 

 

LED 1

Illuminates if the unit shuts down for any reason.

 

 

LED 2

Over-temperature. Allow to cool.

 

 

LED 3

The unit detected a failure. Call Heart Interface

Technical Support.

 

 

 

 

Inverter overload caused by too large a load or

LED 4

short circuit. Reset by cycling power switch or

 

plugging in incoming AC power.

 

 

LED 5

Battery overload caused by excessively discharged

batteries. Refer to page 40.

 

 

 

 

Incoming AC backfeed. Potentially damaging to the

LED 6

unit. Disconnect incoming AC power and correct

 

the situation.

 

 

LED 7

Triac thermal run away. Turn OFF and allow to cool

down.

 

 

 

 

High battery voltage shutdown during charge mode.

LED 8

Check all charging sources for proper voltage.

 

Reset by cycling the power switch.

 

 

LED 9-10

Not used for troubleshooting.

 

 

35

90-0115-00 10/97 Fltman.pm65

Image 35
Contents KKK Fleet Power INVERTER/BATTERY ChargersIntroduction Table of Contents Watts Electronic Protection Power SharingThings YOU should Know Circuit Breaker ProtectionOperation Power SwitchDC Volts Bargraph Remote Control PanelRemote Power Switch System Status LEDsDip Switches Dip Switch Status Status LEDs Feature Switch Set Point Number DIP Switch ProgrammingWet Cell Batteries BatteriesSeries Battery InterconnectionParallel Typical PowerConsumption Fleet Power Battery Chargers Battery ChargingBattery Charging Conventional Battery ChargersBattery charger stages are Battery Charging Battery Charging Battery Charging Battery Charger Voltage Settings Installation Precautions Installation Grounding Neutral Bonding AC WiringGround Fault Circuit Interrupters Remote Control Wiring Battery Cable Fusing DC Wiring15, 20 or 30 Amp Shore Power Inverter Runs Entire Panel Installation OptionAmp Shore Power and Generator. Inverter Runs Entire Panel Amp Shore Power/Generator Inverter Runs 30 Amp Sub-Panel Installation Option 4 Dual AC Input DC Wiring #1 Two Battery* System Using Manual Battery Switch DC Wiring OptionsEach battery shown can represent a battery bank LED TroubleshootingProblem Things to Check Glossary LED Light Emitting Diode Indicator light Model SpecificationsHeart Interface Corporation Warranty
Related manuals
Manual 2 pages 9.6 Kb

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.