Neutral Bonding, AC Wiring | Xantrex Technology 2000, 2500 manual

INSTALLATION

This procedure will connect the chassis of your unit to AC ground. In addition, the AC input and AC output green wires are connected to chassis ground. It is important to connect these wires to the AC ground bus in the circuit breaker panel.

Note: The battery cables are not con- nected to ground or the chassis of the unit.

Neutral Bonding

For safety purposes, the Fleet Power inverter/charger unit internally bonds the AC output neutral to the AC ground when the unit is OFF or in the inverter mode. When incoming AC power is applied and the transfer switch is engaged, the internal neutral-to- ground bond is automatically lifted.

This means that when the vehicle is connected to shore power, the grounding system is connected to the shore power ground, where neutral and earth ground are bonded together. This technique insures safety in all conditions and conforms to the requirements of the NEC.

AC Wiring

The AC wires route through the holes in the bottom of the unit. Use a screwdriver to remove the screws which secure the AC wiring compartment cover plate. Inside, the compartment is divided into 2 sections, one labeled AC Input, the other labeled AC

Output. Each side contains 3 pigtails: black, white and green. Six wire nut con- nectors are also provided.

Black	Hot or Line
White	Neutral
Green	Ground

Conventional metal strain reliefs are provided. These can be replaced by plastic strain reliefs for additional corrosion resis- tance or 3/4 inch conduit fittings if the wiring will be routed through the conduit.

Use proper wire sizes according to the NEC.

AC Input (Fleet Power 1000 and Fleet Power 2000): Feed the 3 conductor AC input wire through the strain relief and into the AC input compartment. You should have 6 inches of individually insulated black, white and green wire. Strip 1/2 inch of insulation off each conductor and connect to the pigtails: black to black, white to white and green to green.

AC Input (Fleet Power 2500): There are 2 options for configuring the AC input to the Fleet Power 2500.

Dual Inputs: The internal battery charger may be fed separately from the transfer input which feeds the AC loads. In this case, connect one 30 Amp feed to the charger pigtails and another 30 Amp feed to the transfer switch input.

Connecting the feeds in this way bal- ances the AC loads when 2 legs of incoming AC power are available. These two feeds can be in or out of phase. Transfer will only

90-0115-00 10/97 Fltman.pm65

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.