Remote Control Wiring

INSTALLATION

WARNING

Persons with heart problems or other conditions which make them susceptible to electric shock may still be injured by ground faults on circuits protected by the GFCI Receptacle. No safety devices yet designed will protect against all hazards or carelessly handled or misused electrical equipment or wiring.

tools or appliances operating from this device. It does not prevent line-to-ground electric shock, but does limit the time of exposure to a period considered safe for a normally healthy person. It does not protect persons against line-to-line, or line-to- neutral faults.

The GFCI Receptacle does not protect against short circuits or overloads. This is the function of the circuit breaker.

Any line-to-ground fault condition indicated by a tripped GFCI must be cor- rected. Grounded fault conditions are dangerous to personnel and property. Should you identify conditions not described in these instructions, contact a qualified electrician.

In the event of power failure which has not affected the breaker, unplug all cord- connected appliances and tools from the GFCI receptacle, and restore power by pressing in the RESET button on the GFCI receptacle. To test, press the TEST button. The RESET button will pop out indicating

that power is off at the GFCI protected outlets. Push the RESET back in and reconnect the appliances one at a time. A defective appliance which trips the GFCI should be repaired at once.

If the RESET button will not stay in after all appliances have been disconnected from the circuit, the GFCI outlet has failed.

If the RESET button does not pop out when the TEST button is pressed, protec- tion is lost. Do not use.

Test Reminder: For maximum protec- tion against electrical shock hazard, test your ground fault circuit interrupter at least once a month. Test procedure:

1.Push TEST button. The RESET button will pop out. Power is now ON or shore power is ON indicating that the device is functioning properly.

2.If RESET does not pop out when testing, do not use this circuit. Protection is lost.

3.To restore power, push the RESET

button.

The remote control is supplied with a 25 or 50 foot section of telephone cable for connection to the unit. Simply plug one end of the cable into the remote connector on the bottom of the unit labeled remote and the other end into the connector on the back of the remote control panel.

Routing the remote cable away from AC and DC wires will minimize the potential for interference which may affect the LED bargraphs.

90-0115-00 10/97 Fltman.pm65

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.