Xantrex Technology 2000, 2500 Remote Control Panel, Remote Power Switch, System Status LEDs

Page 7

REMOTE CONTROL PANEL

An optional remote control panel is available which offers several features not found on the unit. The remote control panel provides LED bargraphs which show system status, battery voltage, and DC Amps in both inverter and charge modes. These bargraphs can also display dip switch posi- tions and shut down conditions.

Remote Power Switch

The switch on the remote is used to control the inverter and can also be used to control the battery charger function. When a remote control is used, the power switch on the inverter should be left in the OFF position.

System Status LEDs

These 4 LEDs monitor the system as described in the table on page 10.

DC Volts Bargraph

These LEDs indicate battery voltage as measured inside the unit. Each LED seg- ment indicates .5 Volts. If an overload occurs and the unit shuts down, the DC

Volts bargraph will stop indicating battery voltage and display the dip switch settings. It will return to indicating battery voltage only after the unit has been reset.

DC Amps Bargraph

These LEDs approximate DC input current in inverter mode and DC output current in battery charger mode. Two ranges are used -- below 50 Amps each segment represents a 10 Amp increment, above 50 Amps each segment represents a 20 Amp increment. Above 130 Amps, a flashing LED segment indicates the value displayed plus 100 Amps (flashing 50 LED is equal to 50 + 100 or 150 Amps DC).

If a shutdown occurs, the DC Amps bargraph will stop indicating DC Amps and will indicate the type of problem . Each LED segment indicates a different problem as described in the troubleshooting section on page 34.

7

90-0115-00 10/97 Fltman.pm65

Page 6 Page 8
Image 7
Page 6 Page 8
Contents KKK Fleet Power INVERTER/BATTERY ChargersIntroduction Table of Contents Watts Electronic Protection Power SharingThings YOU should Know Circuit Breaker ProtectionOperation Power SwitchDC Volts Bargraph Remote Control PanelRemote Power Switch System Status LEDsDip Switches Dip Switch Status Status LEDs Feature Switch Set Point Number DIP Switch ProgrammingWet Cell Batteries BatteriesSeries Battery InterconnectionParallel Typical PowerConsumption Fleet Power Battery Chargers Battery ChargingBattery Charging Conventional Battery ChargersBattery charger stages are Battery Charging Battery Charging Battery Charging Battery Charger Voltage Settings Installation Precautions Installation Grounding Neutral Bonding AC WiringGround Fault Circuit Interrupters Remote Control Wiring Battery Cable Fusing DC Wiring15, 20 or 30 Amp Shore Power Inverter Runs Entire Panel Installation OptionAmp Shore Power and Generator. Inverter Runs Entire Panel Amp Shore Power/Generator Inverter Runs 30 Amp Sub-Panel Installation Option 4 Dual AC Input DC Wiring #1 Two Battery* System Using Manual Battery Switch DC Wiring OptionsEach battery shown can represent a battery bank LED TroubleshootingProblem Things to Check Glossary LED Light Emitting Diode Indicator light Model SpecificationsHeart Interface Corporation Warranty
Related manuals
Manual 2 pages 9.6 Kb

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.
Top Page Image Contents