Grounding

INSTALLATION

10.If installing in a system which in- cludes an existing battery charger or con- verter, make sure these do not operate from the inverter output AC power. This sets up a power loop which, due to ineffi- ciencies, will quickly drain the batteries.

11.Make sure all wiring conforms to local and national electrical codes. If in doubt, consult with a qualified electrician.

12.Keep the overall length of each battery cable less than 10 feet. If needed, attach short extension cables. Do not use frame ground or a ground bonding system as a current carrying conductor. Run the negative cable directly to the battery bank. If the positive and negative cables run parallel to each other, twist the cables together. This will minimize the adverse effects of inductance.

13.To meet electrical codes, a fuse must be installed in the positive battery cable within 18 inches of the battery post. This fuse is intended to protect the battery and cables against a dead short circuit. The inverter is protected internally and will not blow a properly sized fuse.

14.DC wiring is generally very simple, the positive and negative cables from the inverter/charger are connected to the house or auxiliary battery. In the case of multiple batteries the interconnecting jumper cables must be of the same AWG as those sup- plied with the inverter/charger.

15.If multiple battery banks are to be charged, a battery selector switch can be installed, allowing the banks to be charged either individually or simultaneously. A solenoid can also be used.

WARNING

Do not mount the unit in an enclosed battery compartment. Take precautions to keep road dirt and spray off the unit.

For safety purposes, the chassis of the inverter/charger must be connected to your AC ground system. The chassis ground bonding lug is located on the bottom of the unit. This connector can accept two wires, the first is used to connect the unit to AC ground, the second can be used to connect other AC equipment to ground.

Use bare copper insulated wire, solid or stranded. Strip one end and use a screw- driver to secure it to the chassis ground bonding lug. This wire will connect to the ground in your AC electrical system, typi- cally the vehicle chassis. Make sure the connection is clean and tight.

90-0115-00

10/97 Fltman.pm65

2000, 2500 specifications

The Xantrex Technology 2500 is an advanced inverter/charger designed to meet the energy needs of both recreational and off-grid applications. This powerful unit combines versatility, efficiency, and reliability, making it ideal for boating, RVing, and remote living. One of the standout features of the Xantrex 2500 is its ability to produce a sine wave output, which is essential for running sensitive electronics and devices. The pure sine wave output ensures that appliances operate smoothly without interference, providing users with a safer and more reliable power source.

The Xantrex 2500 has a continuous power output of 2500 watts, with a surge capability that can handle short bursts up to 3500 watts. This allows users to start and run larger appliances, such as refrigerators or power tools, with ease. Additionally, the inverter includes an integrated 100-amp automatic transfer switch, which seamlessly transitions between line power and battery power, ensuring continuous power supply without interruption.

One of the notable characteristics of the Xantrex 2500 is its built-in smart battery charger. This charger is capable of optimizing battery performance by adjusting the charge current based on the state of the battery. It supports multiple battery types, including flooded, gel, and lithium batteries, enhancing versatility for various user needs. The inverter also features an advanced battery management system that provides real-time battery monitoring, ensuring users can keep track of their battery health and performance.

The Xantrex 2500 is designed for ease of use, equipped with an intuitive LCD display that provides clear information on power levels, battery voltage, and operational status. This user-friendly interface allows for quick adjustments and monitoring, making it accessible for users of all experience levels.

Durability is another key feature of the Xantrex 2500. Built with rugged components, it is engineered to withstand the harsh environments often encountered in remote settings. This resilience makes it a trusted choice for outdoor enthusiasts and those living off the grid.

In summary, the Xantrex Technology 2500 inverter/charger stands out for its pure sine wave output, robust power capabilities, and smart charging technology. Its combination of performance, durability, and user-friendly design makes it an excellent choice for anyone needing reliable power in challenging environments. Whether for recreational travel or off-grid living, the Xantrex 2500 provides a dependable energy source.