Studer Innotec C2324 COMPACT Battery connections, Solar charge regulator optional, Remote control

Page 7

STUDER INNOTEC

COMPACT

2.2.4The solar charge regulator (optional)

With the built-in solar charge regulator, the COMPACT is a complete solar-power-center. In a solar installation this regulator ensures that the batteries are charged correctly. With the COMPACT, batteries can be charged with a generator and with the solar modules at the same time. The charging of batteries with both energy sources is carried out fully automatically.

2.2.5Remote control

As an option, a remote control can be connected to COMPACT. All operating elements and displays with the exception of the level adjustment are available on the remote control. The remote control is furnished with a 20m long cable. This cable can go to 40m long. On the remote control output power and charging current are also shown.

2.3Battery connections

Lead-acid batteries are normally available in blocks of 2V, 6V or 12V . In most cases, to generate the necessary operating voltage and the capacity of the batteries for the COMPACT many batteries have to be connected together in parallel and or in series. Following three examples are shown:

2.3.1Parallel Connection:

12V

12V

12V

12V

 

 

 

2.3.2Series Connection:

2V

2V

2V

2V

2V

2V

12V

 

 

 

 

 

 

2V

2V

2V

2V

2V

2V

 

 

 

 

 

 

 

 

 

 

 

 

24V

2V

2V

2V

2V

2V

2V

 

 

 

 

 

 

 

 

 

 

 

 

12V

12V

12V

12V

48V

 

 

 

 

User manual

COMPACT V2.0 E

7

Image 7
Contents Compact V2.0 E User and installer ManualIndex table Reset Value Battery Voltages and Absorption Time General Information Special Precautions Introduction Principe schematicDescription of main functions Parallel Connection Battery connectionsRemote control Solar charge regulator optionalConnection AssemblyPlace of assembly FixingProtection cover for the terminals connections Connecting Plan / Front sideSolar + Cabling/wiring Connection to Auxiliary Contact Connection to Remote controlConnection to Temperature Sensor Temp Connect the Solarmodules Solar +/- Only for solar optionDisplay and operating control elements OperatingPush buttons Light Emitting DiodesTurning Knobs Overload Battery ConditionInverter Charge detection system „StandbyEqualization charging Battery chargerInput current repartition Power sharing Cycle of chargeCharging current Transfer systemMultifunctional Contact Fast UPS- Mode for the Transfer SwitchDelayed mode of the Transfer System Solar charge regulator optionMaximum Contact load -230Vac /16Amp-30Vdc/1A Remote ControlBattery voltages and absorption time Temperature sensorStandard setting Reset valueLED11 Program the auxiliary contactSet the voltage and timing threshold These four red LED show the function SetManual operating of Auxiliary Contact ExampleDiagram of the different mode MaintenanceVarious data Technical DataType Solar Charge Regulator-Floating