STUDER INNOTEC | COMPACT |
4.2Light Emitting Diodes:
LED |
| Marking | LED lit |
|
|
|
| LED blinks |
1 |
| AC IN | Voltage corresponding to self- | Voltage, outside of the self- | ||||
|
|
| adjusted values is at the AC IN | adjusted values is at the AC IN | ||||
|
|
| input. |
|
|
|
| input. |
2 |
| CHARGER | Battery Charger is working |
| The input voltage is out value | |||
|
|
|
|
|
|
|
| (voltage or frequency) |
3 |
| SOLAR | Connected | Solarmodules | are |
| ||
|
| CHARGE | delivering energy |
|
|
|
| |
4 |
| Program | Program mode for Aux. Contact |
| ||||
5 |
| Contact active | Auxiliary Contact is activated |
|
| |||
6 |
| Contact manual | Aux. Cont. manually activated |
|
| |||
7 |
|
| Transfersystem | is | active. | In- |
| |
|
|
| coming voltage is being sent |
| ||||
|
|
| directly to AC OUT outlet |
|
| |||
8 |
| AC OUT | There is voltage at the AC OUT | The Inverter is in | ||||
|
|
| outlet |
|
|
|
|
|
9 |
| INVERTER | Inverter is working |
|
| Forced | ||
10 |
| Over Temp. | For the time being the COMPACT |
| ||||
|
|
| is out of service because of |
| ||||
|
|
| overheating. |
|
|
|
|
|
11 |
| Overload | The COMPACT is out of service |
| ||||
|
|
| because of overload or short- |
| ||||
|
|
| circuit |
|
|
|
|
|
12 |
| Batt. Low/High | Battery voltage is too low |
| Battery voltage is too high | |||
13 |
| OFF | COMPACT is turned off. Turning it | COMPACT is for the time being | ||||
|
|
| back on is only possible manually. | turned off. Turning it back on will | ||||
|
|
|
|
|
|
|
| follow automatically! |
14 |
|
| Battery Charger | and | or Solar |
| ||
|
|
| Charge Regulator are doing an |
| ||||
|
|
| equalization cycle |
|
|
| ||
| Charge condition of Battery |
| LED 15 – Absorbtion time is | |||||
|
|
|
|
|
|
|
| running |
25 |
| CURRENT | Display the value of the output power in % of Pnom (in Inverter Mode) | |||||
|
| MONITOR | and the charge current in Amps. (in Charger Mode) In this mode the | |||||
|
|
| 200% LED indicate that power sharing is in use. | |||||
4.3 | Push buttons: |
|
|
|
|
|
| |
|
|
|
| |||||
19 |
| ON/OFF | Turning the COMPACT on and off (Help Button for Programming) | |||||
20 |
| RESET | Alarm Signal off (Help Button for Programming) | |||||
21 |
| Aux. Contact | Control Aux. contact (Help Button for Programming) | |||||
4.4 | Turning Knobs: |
|
|
|
|
|
| |
22 |
| CHARGER | Adjustment for max. Charging Current (Not for Solar charge regulator) | |||||
23 |
| TRANSFER | Adjustment for Transfer Voltage Threshold(TRANSFER – INVERTER) | |||||
24 |
| STANDBY | Adjustment for „Standby“ system |
| ||||
26 |
| INPUT LIMIT | Must be adjusted to the maximal available current of your AC INPUT | |||||
|
|
| supply (see on chap. 4.6.3) |
|
| |||
User manual | COMPACT V2.0 E | 13 |