Loading Instructions, Operating Instructions

LOADING INSTRUCTIONS

The load capacity rating as inscribed on the nameplate of your unit designates its net capacity. This capacity must never be exceeded, as permanent damage or personel injury may result.

UNPACKING AND HANDLING INSTRUCTIONS

CAUTION

Read instructions completely before adjusting. Follow instructions carefully.

Use end wrench, not crescent wrench, as crescent may slip.

Recommended unpacking and handling is shown below.

Recommended dock height is 50". Service range is +5" to -5".

Fork Truck

Boom

Chain

Self-locking

Clamp

WARNING:

KEEP HANDS AND

FINGERS OUT OF

HINGE AREA!

Mechanical Operation • Series FM

1.) Remove the lever from right side of bumper box and insert it into the socket of the back plate (the socket is on right hand side).

2.) Pull the handle back until the leveler plate is fully extended and leaning back towards the ramp.

3.) Push the handle forward to allow the lip

plate to extend and fall on the bed of the trailer.

Do not operate without a truck in place as the operator could be thrown over the dock edge by the lever.

4.) Remove the lever and place it in the bumper box.

5.) When loading and unloading is complete, remove chocks and allow trailer to pull away. The Edge-O- Dock will return to its original position.

Hand Pump Operation • Series PP

1.) Rotate the valve on the pump clockwise to close the fluid return valve. Raise the dockleveler with the hand pump. When the dockleveler clears the trailer bed and fully extends, open the return valve to allow the lip to settle on the trailer bed. Be sure to leave the fluid return valve open to allow the dockleveler to float with the trailer.

2.) When loading/unloading is complete, remove the chocks and allow the trailer to pull away. The Edge-O-Dock will return to its original position.

Electric Operation • Series PE

1.) Push "RAISE" button on control box. The dockleveler will begin to rise. When the dockleveler lip reaches full extension, release the button. It will lower and settle on the trailer bed.

2.) When loading/unloading is complete, remove the chocks and allow the trailer to pull away. The Edge-O-Dock will return to its original position.

OPERATING INSTRUCTIONS

I.)	Back trailer slowly against Edge-O-Dock bumpers.
	Turn off the engine and set the emergency brake on
	truck. Position wheel chocks (by others) per OSHA
	requirements to prevent trailer movement.
II.)	Follow the instructions below according to the model
	of Edge-O-Dock you have.

Ordering Replacement or Extra Parts

Our company takes pride in using the finest available parts for our equipment. We are not responsible for equipment failure resulting from the use of unapproved replacement parts. To order replacement or extra parts for your equipment contact Customer Service at the factory. In any correspondence with the factory please include the Serial Number which is inscribed on the nameplate of the piece of equipment. Use only the part numbers provided in this Owner's Manual. Please indicate the motor phase and voltage that the equipment is operating on.

PE Series, PP Series, FM Series specifications

Skil Power Tools has long been recognized for delivering innovative and reliable equipment tailored for both professional and DIY enthusiasts. The Skil FM Series, PP Series, and PE Series exemplify the brand's commitment to efficiency, performance, and user-friendliness.

The Skil FM Series is particularly well-regarded for its advanced features in the realm of portable and compact power tools. This series often includes versatile tools such as cordless drills and saws, specifically designed for ease of use and mobility. Key characteristics of the FM Series involve lightweight designs, ergonomic grips, and the latest battery technologies. Many tools in this series are equipped with lithium-ion batteries that provide long-lasting power and quick recharge capabilities, enabling users to work without interruption. Additionally, the FM Series often boasts integrated LED lights, making it easier to work in low-light conditions.

Next, the Skil PP Series is tailored towards precision and performance, ideal for woodworking and intricate projects. This series often includes routers, jigsaws, and oscillating multi-tools. The standout feature of the PP Series is its precision engineering, which ensures that every cut and finish presents a professional touch. These tools often incorporate variable speed settings, allowing users to customize their approach based on the material and task at hand. Another essential aspect of the PP Series is the inclusion of advanced dust extraction systems, which contribute to cleaner work environments and enhanced visibility during intricate operations.

Lastly, the PE Series focuses on outdoor power equipment. This includes tools like lawnmowers, string trimmers, and leaf blowers. The PE Series emphasizes durability and performance in various outdoor conditions. A notable feature is the integration of eco-friendly technologies, such as electric motors that reduce emissions and noise levels. These tools are designed with sturdy yet lightweight materials for ease of maneuverability, and many come with adjustable cutting heights and various speed settings to optimize performance based on user needs.

In summary, the Skil FM, PP, and PE Series each serve distinct user needs while providing advanced technologies, ergonomic designs, and reliable performance. Whether for indoor renovations, precision woodworking, or outdoor maintenance, Skil continues to innovate and engineer tools that cater to the diverse demands of users, enhancing productivity and overall experience.