Graco Pro Mix Work Light Manual for Model 312781E: Parts and Calibration Insights

Page 16

Parts

Part No. 256875, for ProMix 3KS Proportioner

1 Apply pipe sealant to all pipe threads when reassembling.

Detail of Calibration Kit (53), shown installed on ProMix 2KS Fluid Manifold

45*

39*

31*

39*

45*

18*

15‡* 16‡ 15‡* 36

TI14819a

*40 30

31*

15‡*16‡ 15‡* 17

18*

13*	19

14*

TI14363a

312781E

Image 16

Contents Important Safety Instructions Fluid Mix ManifoldRelated Manuals ContentsModels Installation Flush Before Using EquipmentAir Connections Fluid ConnectionsKey ProMix 2KS Fluid Station Key ProMix 3KS Fluid StationDVA2 KeyDVA3 behind Setup the Fluid Manifold for Dynamic Dosing Restrictor Sizes Size Code Orifice SizeAdjust gun atomizing air pressure as needed OperationPurging Operation GuidelinesMaintenance Mix Manifold Valve SettingsPreventive Maintenance Schedule WeeklyTroubleshooting Isolate a Mixing ProblemCommon Causes Unbalanced PressureRepair Remove the Integrator MixerRemove the Restrictor ProMix 2KE, Dynamic Dosing only Remove from the bottomRepair the Valves and Seats ProMix 2KS and ProMix 3KS only Dispense Valve CapRebuild the Mix Manifold Replace the Outlet Tube and Static Mixer TubeRepair 312781E Parts Part No , for ProMix 2KS ProportionerPart No. Description Qty Integrator Kits include partsSize Description Part No , for ProMix 3KS Proportioner Part No , for ProMix 3KS Proportioner Integrator Kits Part No , for ProMix 2KE Proportioner, Sequential DosingPart Description Qty Part No , for ProMix 2KE Proportioner, Dynamic Dosing Restrictor KitParts Technical Data 289695, 256875, and 262398 4000 psi 28 MPa, 280 barGraco Standard Warranty Graco Information