Graco 312781E important safety instructions Setup the Fluid Manifold for Dynamic Dosing

Page 6

Installation

Setup the Fluid Manifold for Dynamic Dosing

If you will be operating using dynamic dosing, the fluid manifold must be setup properly for your application. Order the 15U955 Injection Kit (accessory).

NOTE: For ProMix 3KS, order two 15U955 Injection Kits.

See your proportioner manuals for setup instructions, and to select the appropriate size restrictor for your selected flow and ratio.

Table 1: Restrictor Sizes

Size Code	Orifice Size	Part No.

2*	.020	15U936

3*	.030	15U937

4*	.040	15U938

5✓	.050	15U939

6✓	.060	15U940

7*	.070	15U941
8✓	.080	16D554

*These restrictors are included in Injection Kit 15U955.

✓These restrictors are optional sizes, not included in the Injection Kit.

6

312781E

Image 6

Contents Important Safety Instructions Fluid Mix ManifoldContents Related ManualsModels Air Connections InstallationFlush Before Using Equipment Fluid ConnectionsKey ProMix 2KS Fluid Station Key ProMix 3KS Fluid StationKey DVA2DVA3 behind Setup the Fluid Manifold for Dynamic Dosing Restrictor Sizes Size Code Orifice SizePurging Adjust gun atomizing air pressure as neededOperation Operation GuidelinesPreventive Maintenance Schedule MaintenanceMix Manifold Valve Settings WeeklyCommon Causes TroubleshootingIsolate a Mixing Problem Unbalanced PressureRemove the Restrictor ProMix 2KE, Dynamic Dosing only RepairRemove the Integrator Mixer Remove from the bottomRepair the Valves and Seats ProMix 2KS and ProMix 3KS only Dispense Valve CapRebuild the Mix Manifold Replace the Outlet Tube and Static Mixer TubeRepair 312781E Parts Part No , for ProMix 2KS ProportionerIntegrator Kits include parts Part No. Description QtySize Description Part No , for ProMix 3KS Proportioner Part No , for ProMix 3KS Proportioner Part No , for ProMix 2KE Proportioner, Sequential Dosing Integrator KitsPart Description Qty Part No , for ProMix 2KE Proportioner, Dynamic Dosing Restrictor KitParts Technical Data 289695, 256875, and 262398 4000 psi 28 MPa, 280 barGraco Standard Warranty Graco Information