Graco 312781E Key ProMix 2KS Fluid Station, Key ProMix 3KS Fluid Station

Page 4

Installation

1

2

DVA

FI DVB

MB

MS

MA

RVB

RVA

APV						TI12556a
APV
	AT	SVA	SM	SVB	SPV
		SVA	SM	SVB	SPV
		Key: ProMix 2KS Fluid Station
		MA	Component A Meter (not		SVB	Component B Shutoff
			included in mix manifold)			Valve
		DVA	Component A Dose Valve		MS	Solvent Meter (accessory)
		RVA	Component A Sampling		SPV	Solvent Purge Valve
			Valve		APV	Air Purge Valve
		SVA	Component A Shutoff		SM	Static Mixer
FI			Valve		FI	2KS Fluid Integrator
FI		MB	Component B Meter (not		AT	Air Purge Valve Air Supply
		MB	Component B Meter (not		AT	Air Purge Valve Air Supply
	DVC		included in mix manifold)			Tube
	DVC	DVB	Component B Dose Valve
		DVB	Component B Dose Valve
		RVB	Component B Sampling
			Valve

MC	Key: ProMix 3KS Fluid Station
	Key: ProMix 3KS Fluid Station
CPV	MC	Component C Meter (not included
CPV		in mix manifold)
	DVC	Component C Dose Valve
	RVC	Component C Sampling Valve
	SVC	Component C Shutoff Valve
	CPV	Component C Purge Valve
	SM	Static Mixer
	FI	3KS Fluid Integrator

RVC

	1	3KS fluid inlet. Connect fluid supply line from
	SVC	2KS fluid manifold outlet here.
SM	2	Connect fluid supply line to gun.
	TI14382a

FIG. 1. ProMix 2KS and ProMix 3KS Wall Mount Fluid Stations

4

312781E

Image 4

Contents Important Safety Instructions Fluid Mix ManifoldRelated Manuals ContentsModels Installation Flush Before Using EquipmentAir Connections Fluid ConnectionsKey ProMix 2KS Fluid Station Key ProMix 3KS Fluid StationDVA2 KeyDVA3 behind Setup the Fluid Manifold for Dynamic Dosing Restrictor Sizes Size Code Orifice SizeAdjust gun atomizing air pressure as needed OperationPurging Operation GuidelinesMaintenance Mix Manifold Valve SettingsPreventive Maintenance Schedule WeeklyTroubleshooting Isolate a Mixing ProblemCommon Causes Unbalanced PressureRepair Remove the Integrator MixerRemove the Restrictor ProMix 2KE, Dynamic Dosing only Remove from the bottomRepair the Valves and Seats ProMix 2KS and ProMix 3KS only Dispense Valve CapRebuild the Mix Manifold Replace the Outlet Tube and Static Mixer TubeRepair 312781E Parts Part No , for ProMix 2KS ProportionerPart No. Description Qty Integrator Kits include partsSize Description Part No , for ProMix 3KS Proportioner Part No , for ProMix 3KS Proportioner Integrator Kits Part No , for ProMix 2KE Proportioner, Sequential DosingPart Description Qty Part No , for ProMix 2KE Proportioner, Dynamic Dosing Restrictor KitParts Technical Data 289695, 256875, and 262398 4000 psi 28 MPa, 280 barGraco Standard Warranty Graco Information