Graco 312781E important safety instructions Fluid Mix Manifold, Important Safety Instructions

Page 1

Instructions-Parts

Fluid Mix Manifold

312781E

EN

For proportional mixing of plural component coatings. For professional use only.

See page 2 for model information, including maximum working pressure.

Important Safety Instructions

Read all warnings and instructions in this manual.	Part No. 256875
For complete warnings and instructions see your
proportioning system manual. Hazard symbols refer
to specific procedure risks. Save all instructions.

Part No. 289695

TI14362a

Part No. 262399

TI11577a

Part No. 262398

TI16517a	TI16516a

Image 1

Contents Fluid Mix Manifold Important Safety InstructionsRelated Manuals ContentsModels Flush Before Using Equipment InstallationAir Connections Fluid ConnectionsKey ProMix 3KS Fluid Station Key ProMix 2KS Fluid StationDVA2 KeyDVA3 behind Restrictor Sizes Size Code Orifice Size Setup the Fluid Manifold for Dynamic DosingOperation Adjust gun atomizing air pressure as neededPurging Operation GuidelinesMix Manifold Valve Settings MaintenancePreventive Maintenance Schedule WeeklyIsolate a Mixing Problem TroubleshootingCommon Causes Unbalanced PressureRemove the Integrator Mixer RepairRemove the Restrictor ProMix 2KE, Dynamic Dosing only Remove from the bottomDispense Valve Cap Repair the Valves and Seats ProMix 2KS and ProMix 3KS onlyReplace the Outlet Tube and Static Mixer Tube Rebuild the Mix ManifoldRepair 312781E Part No , for ProMix 2KS Proportioner PartsPart No. Description Qty Integrator Kits include partsSize Description Part No , for ProMix 3KS Proportioner Part No , for ProMix 3KS Proportioner Integrator Kits Part No , for ProMix 2KE Proportioner, Sequential DosingPart Description Qty Restrictor Kit Part No , for ProMix 2KE Proportioner, Dynamic DosingParts 289695, 256875, and 262398 4000 psi 28 MPa, 280 bar Technical DataGraco Information Graco Standard Warranty