Porter-Cable 28-475X, 28-248 instruction manual Accessories, PARTS, Service or Warranty Assistance

Page 27

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

27

Image 27 Contents
Wood Cutting Band Saw Important Safety Instructions Safety Guidelines DefinitionsStay ALERT, Watch What YOU are Doing Additional Safety Rules For Band Saws Power Connections Functional Description Unpacking and Cleaning Band SAW Parts Do not Completely Tighten the Bolt and NUT AT this Time AssemblyMotor Bracket To Stand Motor to Motor BracketDust Chute TOP Plate to StandHinge Catch a is Pointed UP AS Shown in FIG Stand Door to StandDust Port Only be Attached with the TWO Bottom Holes in the StandCompletely Tighten the Screws AT this Time Hinge Opening is Pointing DownIs on the Side of the Stand with the Belt Opening B SAW to StandMotor Pulley Belt to SAW and Motor PulleySure the Slot C , in the Table is Facing Away from the ARM D Table to SAWBlade to SAW Table InsertLength Blades On / OFF Switch To Stand Make Sure That the Motor Plug Operating Controls and AdjustmentsLocking Switch in the OFF Position Starting Stopping SAWAdjusting Table Stops Disconnect Machine from Power SourceTilting the Table To set the adjustable stops Adjusting Blade TensionVertical Adjustment of the Upper Blade Guide Assembly Tracking the BladeNever Track the Blade While Tool is Running Adjusting the Upper Blade Guides and Blade Support Bearing Adjusting Lower Blade Guides and Blade Support Bearing OperationsCutting Curves Probable Cause Remedy Troubleshooting GuideTrouble Blade will not Track Band SAW Blades Page PARTS, Service or Warranty Assistance AccessoriesCanadian PORTER-CABLE Delta Service Centers