WARNING
§Before operating the saw, make sure all protective guards are securely in place. Multiquip saws are supplied with a blade guard, collar guard and belt guard.
§Whenever necessary, replace operation and safety decals if they become difficult to read.
§Verify the engine start switch is set to the OFF position before installing a blade.
§Make sure the operator knows how to turn the engine OFF in case of an emergency.
§Do not go near rotating parts (blades, belts, pulleys or wheels) while engine is running.
§Catalytic muffler and exhaust gases are extremely hot. Stay clear of muffler and exhaust gases. Allow these parts to cool before servicing the saw.
§Stay clear of the saw while it is being hoisted.
§Anytime the saw is lifted onto its nose, or tilted fully back, for maintenance access, the high end MUST be blocked up to prevent the possibility of crush injury!
§Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with HOT components can cause serious burns.
§Never operate the saw in any enclosed or narrow area where free flow of air is restricted. If the air flow is restricted it will cause serious damage to the saw’s engine and may cause injury to people. Remember the saw’s engine gives off DEADLY carbon monoxide gas.
§ALWAYS refuel in a
§ALWAYS use extreme caution when working with flammable liquids. When refueling, STOP the engine and allow it to cool.
§NEVER smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a HOT engine.
§NEVER operate the saw in an explosive atmosphere where fumes are present or near combustible materials. An explosion or fire could result causing severe bodily harm or even death.
§NEVER use fuel as a cleaning agent.
12