Multiquip STX55J6 operation manual STX-SERIES Training Checklist

Page 5

STX-SERIES — TRAINING CHECKLIST

TRAINING CHECKLIST

This checklist lists the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist when training a new operator or use as a review for more experienced operators.

TRAINING CHECKLIST

NO.	DESCRIPTION	OK?	DATE

1	Read Operator’s Manual completely.

2	Machine layout, location of components, checking of engine and hydraulic oil levels.

3	Fuel system, refueling procedure.

4	Operation of spray and lights.

5	Operation of controls (machine not running).

6	Safety controls, safety stop switch operation.

7	Emergency stop procedures.

8	Startup of machine, pre-heat, engine choke.

9	Maintaining a hover.

10	Maneuvering.

11	Pitching.

12	Matching blade pitch. Twin-Pitch™

13	Concrete finishing techniques.

14	Shutdown of machine.

15	Lifting of machine (lift loops).

16	Machine transport and storage.

Operator _________________________________________ Trainee __________________________________________

COMMENTS:

STX-SERIES • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (07/16/04) — PAGE 5

Image 5

Contents STX Series RIDE-ON Power Trowel Page Heres HOW to GET Help STX-SERIES Table of Contents Training Checklist STX-SERIES Training ChecklistDaily PRE-OPERATION Checklist STX-SERIES Daily PRE-OPERATION ChecklistDo not follow directions STX-SERIES Safety Message Alert SymbolsEmergencies STX-SERIES Safety Message Alert SymbolsMaintenance Safety General SafetyOperation and Safety Decals STX-SERIES Operation and Safety DecalsThis value includes the seat height STX-SERIES SpecificationsGeneral Information STX-SERIES General InformationToolbox Compartment Storage for tools STX-SERIES Controls and Components FrontSTX-SERIES Controls and Components Rear STX-SERIES Controls and ComponentsPRE-INSPECTION STX-SERIES PRE-INSPECTIONEngine Oil FuelSTX-SERIES Initial START-UP Insert the ignition key into the ignition switch FigureInitial START-UP Starting the EngineSTX-SERIES Initial START-UP Oil and Charge Indicator LightsSteering STX-SERIES OperationOperation Push both the left and right joysticks forward Figure STX-SERIES OperationEngine Shut-Down Blade Pitch ControlFailure to allow the engine to idle Left Pitch all the way DownMaintenance Procedures STX-SERIES MaintenanceMaintenance Matching Blade Pitch for Both Sets of Blades STX-SERIES MaintenanceChanging a Blade Blade Pitch Adjustment BoltPressure Gauge Hydraulic Pump Checking Hydraulic PressureChecking Steering Pressure Steering Pressure AdjustmentPitch Pressure Check Pitch Pressure AdjustmentTroubleshooting STX-SERIES TroubleshootingLights optional not working Lights? STX-SERIES TroubleshootingPage Multiquip INC

Related manuals

Manual 64 pages 22.72 Kb