Multiquip STX55J6 operation manual STX-SERIES Safety Message Alert Symbols, Emergencies

Page 8

STX-SERIES SAFETY MESSAGE ALERT SYMBOLS

Accidental Starting

ALWAYS place the ON/OFF switch in the OFF position, and remove the key.

Over Speed Conditions

NEVER tamper with the factory settings of the engine governor or settings. Personal injury and damage to the engine or equipment can result if operating in speed ranges above maximum allowable.

Respiratory Hazard

ALWAYS wear approved respiratory protection.

EMERGENCIES

ALWAYS know the location of the nearest fire extinguisher.

ALWAYS know the location of the nearest and first aid kit.

In emergencys always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

Sight and Hearing hazard

ALWAYS wear approved eye and hearing protection.

 

Equipment Damage Messages

NOTE

This Ride-On Power Trowel, other

 

 

property, or the surrounding

 

 

 

 

 

environment could be damaged if

Other important messages are provided throughout this manual

you do not follow instructions.

to help prevent damage to your trowel, other property, or the

 

surrounding environment.

 

PAGE 8 — STX-SERIESRIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (07/16/04)

Image 8
Contents STX Series RIDE-ON Power Trowel Page Heres HOW to GET Help STX-SERIES Table of Contents STX-SERIES Training Checklist Training ChecklistSTX-SERIES Daily PRE-OPERATION Checklist Daily PRE-OPERATION ChecklistSTX-SERIES Safety Message Alert Symbols Do not follow directionsSTX-SERIES Safety Message Alert Symbols EmergenciesGeneral Safety Maintenance SafetySTX-SERIES Operation and Safety Decals Operation and Safety DecalsSTX-SERIES Specifications This value includes the seat heightSTX-SERIES General Information General InformationSTX-SERIES Controls and Components Front Toolbox Compartment Storage for toolsSTX-SERIES Controls and Components STX-SERIES Controls and Components RearSTX-SERIES PRE-INSPECTION PRE-INSPECTIONEngine Oil FuelInsert the ignition key into the ignition switch Figure STX-SERIES Initial START-UPInitial START-UP Starting the EngineOil and Charge Indicator Lights STX-SERIES Initial START-UPSteering STX-SERIES OperationOperation STX-SERIES Operation Push both the left and right joysticks forward FigureBlade Pitch Control Engine Shut-DownFailure to allow the engine to idle Left Pitch all the way DownMaintenance Procedures STX-SERIES MaintenanceMaintenance STX-SERIES Maintenance Matching Blade Pitch for Both Sets of BladesBlade Pitch Adjustment Bolt Changing a BladeChecking Hydraulic Pressure Pressure Gauge Hydraulic PumpSteering Pressure Adjustment Checking Steering PressurePitch Pressure Adjustment Pitch Pressure CheckSTX-SERIES Troubleshooting TroubleshootingSTX-SERIES Troubleshooting Lights optional not working Lights?Page Multiquip INC
Related manuals
Manual 64 pages 22.72 Kb