Beginning Assembly | Extension Wings | |
|
|
|
| Keep clothing rolled up |
| and out of the way of |
| machinery and keep |
| hair pulled back. |
! | Disconnect power to the |
machine when perform- | |
ing any maintenance or | |
| assembly. Failure to do |
| this may result in serious |
| personal injury. |
Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
TOOLS REQUIRED: You will need a high quality square, a long straightedge, 10mm, 12mm, 14mm open end wrenches and a 3mm Allen¨ wrench.
The table and the wings represent a very heavy load. DO NOT
To attach the extension wings to the saw:
1.Attach the left wing to the table using the (3)
2.Attach the right wing to the table using the
(3)
3.Align the top of the wings flush with the table top directly above the front bolts and flush with the front edge of the table. Tighten the front bolts.
4.Raise or lower the rear of the extension wings until the middle of the wings are flush with the table top. Tighten the middle bolts.
5.Raise or lower the rear of the wings until the wings and table are flush. Tighten the rear bolts.
6.
|
|
|
|
|
|
|
|
|
| G1023Z Series | |
|
|