Site Planning | Order Of Assembly | |
|
|
|
|
|
|
When placing the Model G4227 Sliding Table in your shop, two major considerations should be addressed: working clearances and lighting.
1.Working clearances can be defined as the safe distance between other machines and obstacles that may limit material being processed or person(s) operating those machines. Consider existing and anticipated machine needs, anticipated size of material to be processed through each machine, and space for auxiliary stands and/or work tables. You may also want to consider the relative position of each machine to one another for efficient material handling. Be sure to allow yourself sufficient room to safe- ly operate your machines in any foresee- able operation.
2.Lighting should be bright enough to eliminate shadow and prevent eye strain. Electrical cir- cuits should be dedicated or large enough to handle motor amp loads and proper lighting. Outlets should be located near each machine so power or extension cords are not obstructing
The sliding table only requires minimal assembly and will go together quickly. Assemble in the fol- lowing order:
1.Mount the upper rail to the machine.
2.Mount the lower guide bracket to the machine.
3.Assemble and mount the sliding table assembly.
4.Attach the fence.
TOOLS REQUIRED
Only a few common tools are required to assem- ble your sliding table. Specifically, these are: Phillips® head screwdriver, 3mm, 5mm and 10mm Allen® wrenches, 14mm and 17mm open end wrenches.
Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| G4227 Sliding Table | |
|
|
|
|