Grizzly G1019 instruction manual Assembly, Stand

SECTION 4: ASSEMBLY

Keep clothing rolled up and out of the way of machinery and keep hair pulled back.

Disconnect power to the machine when perform- ing any maintenance or assembly. Failure to do this may result in serious personal injury.

Wear safety glasses dur- ing the entire assembly process. Failure to com- ply may result in serious personal injury.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

Stand

The Model G1019 Bandsaw stand is an A-frame, panel-style stand. The front and rear panels are connected with one panel at the top and two cross braces near the bottom.

Sometimes sheet metal parts have a tendency to ''spring'' after they are formed. For this reason, you may need to use a little extra force to align holes to insert bolts.

1.Start with the stand panel with the switch mounted in it. Turn the panel upside down and attach the rubber feet using (2) 1⁄4''-20 x 1'' Phillips® head screws, (2) flat washers and (2) hex nuts provided. Tighten down. See Figure 3. Repeat this step with the second stand panel.

Figure 3. Attach rubber feet first.

-10- G1019 14'' Bandsaw