Stand Guards
1.Place the pulley and belt guard case over the drive pulley and secure using the #10- 24 x 1⁄2'' pan head screws, lock washers, flat washers and wing nuts supplied. See
Figure 16.
2.Insert the black plastic stand panels/covers in place. See Figure 17.
Figure 16. Guard case in place.
Figure 17. Panel cover insertion.
Never operate machine without the guard case and panel cover in Figures 16 and 17 in place. Ignoring this caution creates a potentially hazardous situation in which clothing, hair, hands or other body parts may be pulled into the moving belt(s), caus- ing moderate to severe personal injury.
G1019 14'' Bandsaw |