Extension Cords | Grounding |
Should it be necessary to use an extension cord, make sure the cord is rated Hard Service (grade
S)or better. Refer to the chart on page 3 to deter- mine the minimum gauge for the extension cord. The extension cord must also contain a ground wire and plug pin. Always repair or replace exten- sion cords when they become worn or damaged.
We do not recommend the use of extension cords on 220V equipment. It is much better to arrange the placement of your equipment and the installed wiring to eliminate the need for extension cords.
We have covered some basic electrical requirements for the safe operation of your Bandsaw. These requirements are not nec- essarily comprehensive. You must be sure that your particular electrical configuration complies with local and state codes. Ensure compliance by checking with your local municipality or a licensed electrician.
In the event of an electrical short, grounding pro- vides electric current a path of least resistance to reduce the risk of electric shock. This tool is equipped with an electric cord having an equip-
Improper connections of the
This equipment must be grounded. Verify that any existing electrical outlet and circuit you intend to plug into is actually grounded. Under no cir- cumstances should the grounding pin from any
G1019 14'' Bandsaw |