Grizzly G0524 owner manual Site Considerations Clean Up, Floor Load, Working Clearances

Site Considerations Clean Up

Floor Load

The Model G0524 weighs 1980 lbs. Most com- mercial floors are suitable for your machine. Some floors may require additional reinforcement to support the machine, the operator, and the workpiece.

Working Clearances

Consider existing and anticipated needs, size of material to be processed through each machine, and space for auxiliary stands, work tables or other machinery when establishing a location for your saw. See Figure 12 for the footprint of the Model G0524.

62"

FRONT

45"

Figure 12. Model G0524 footprint.

Unsupervised children and visitors inside your shop could receive serious per- sonal injury. Ensure child and visitor safety by keep- ing all entrances to the shop locked at all times. DO NOT allow unsuper- vised children or visitors in the shop at any time.

The unpainted surfaces are coated with a waxy oil to protect them from corrosion during ship- ment. Remove this protective coating with a sol- vent cleaner or citrus-based degreaser such as Grizzly’s G7895 Degreaser. To clean thoroughly, some parts may need to be removed. For opti- mum performance from your machine, make sure you clean all moving parts or sliding contact surfaces that are coated. Avoid chlo- rine-based solvents as they may damage painted surfaces should they come in contact.

Gasoline and petroleum products have low flash points and could explode if used to clean machin- ery. DO NOT use gasoline or petroleum products to clean the machinery.

Smoking near solvents could ignite an explosion or fire and cause serious injury. DO NOT smoke while using solvents.

Lack of ventilation while using solvents could cause serious person- al health risks, fire, or environmental hazards. Always work in a well ventilated area to pre- vent the accumulation of dangerous fumes. Supply the work area with a constant source of fresh air.

G0524 Rip Saw -15-