SECTION 7: MAINTENANCE
Always disconnect power to the machine before performing maintenance. Failure to do this may result in serious person- al injury.
Schedule
Check for the following conditions before each use:
•Loose mounting bolts.
•Damaged saw blade.
•Worn or damaged wires.
•Leaking or broken lube lines.
•Empty lube reservoir.
•Any other condition that could hamper the safe operation of this machine.
Monthly:
•Grease Fittings
•
After the first 100 hours:
•Gear Box
Every 2500 Hours:
•Gear Box
Grease Fittings
Lubricate the four grease fittings (Figure 24) with a general purpose grease after every month (160 Hours) of regular use.
Grease Fittings (2 of 4)
Figure 24. Grease fittings (Additional 2 fittings
are on opposite side of head casting).
Gear Box
The oil inside the gear reducer should be replaced after the first month (160 hours) of regular use. We recommend 90 Wt. gear oil.
After the first oil change, the oil inside the gear reducer should be replaced after every 2500 hours of use. We recommend 90 Wt. gear oil.
G0524 Rip Saw |