Grizzly G0524 owner manual Control Panel, Main Motor Start Button-Starts the saw blade

M

K N

L Figure 6. Blade compartment close-up.

O

Figure 7. Variable speed knob close-up.

K.Pressure Rollers—(1 of 4) Holds the workpiece against the conveyor track during the cutting operation.

L.Auxiliary Pressure Rollers—(2 of 4) Must be used when rip cutting workpieces shorter than 81⁄2" long.

M.Saw Blade—Performs the cutting operation.

N.Lubrication Points—(2 of 4) Grease fittings that need to be lubed periodically with a grease gun.

O.Variable Speed Adjustment Knob—Turn the dial clockwise to decrease the feed rate and counterclockwise to increase it. The feed rate is variable between 30-112 FPM.

Control Panel

A D

B E

C	F
Figure 8. Control panel.

A.EMERGENCY STOP Button—Disconnects power to all motors in the motor cabinet.

B.MAIN MOTOR START Button—Starts the saw blade.

C.FEED MOTOR START Button—Starts the conveyor track.

D.POWER Light—Indicates there is power to the control panel.

E.MAIN MOTOR STOP Button—Stops the saw blade.

F.FEED MOTOR STOP Button—Stops the

conveyor track.

-10- G0524 Rip Saw