Grizzly G0524 Dust Collection Auxiliary Rollers, Components and Hardware Needed Qty, Tools Needed

Dust Collection Auxiliary Rollers

An efficient and clean dust collection system is essential to the proper function of the rip saw. Ensuring a healthy work environment is also dependent upon cleaning and maintaining the dust collection system. Clamp a 4" hose from the dust collection system to the dust port (Figure 16).

Figure 16. Dust collection hook-up.

Components and Hardware Needed: Qty
Auxiliary Roller Brackets (Left)	2
Auxiliary Roller Brackets (Right)	2
Auxiliary Rollers	4
Hardware Bag
—Cap Screws M6-1.0 x 16	8
—Setscrews M6-1.0 x 30	4
—Lock Washers 6mm	8
—Flat Washers 6mm	4
—Hex Nuts 6-1.0	4
Tools Needed:
Allen Wrench 3mm	1
Allen Wrench 4mm	1
Allen Wrench 5mm	1
Wrench 10mm	1
Wrench 13mm	1

The Model G0524 is supplied with 4 auxiliary rollers (Figure 17) that can be attached when rip cutting workpieces shorter than 8". Note—These auxiliary rollers can be left on the machine when cutting longer boards; however, the maximum thickness cutting capacity of the saw is reduced to 21⁄4".

Auxiliary Roller

Figure 17. Auxiliary roller (1 of 4).

G0524 Rip Saw -19-