Global Machinery Company ATBR1650-3PK instruction manual Introduction

Page 18

Introduction

Your new GMC air tool will more than satisfy

your expectations. It has been manufactured under stringent GMC Quality Standards to meet superior performance criteria.

You will find your new tool easy and safe to operate, and, with proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire Instruction Manual before using your new GMC Air Tool. Take special care to heed the Cautions and Warnings.

Your GMC air tool has many features that will make your job faster and easier. Safety, performance, and dependability have been given top priority in the development of this tool, making it easy to maintain and operate.

Environmental protection

Recycle unwanted materials instead

of disposing of them as waste. All tools, hoses and packaging should be sorted, taken to the local recycling centre and disposed of in an environmentally safe way.

Description of symbols

The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use.

Wear hearing protection. Wear eye protection. Wear breathing protection.

Specifications

Operating Pressure:

60

– 120 PSI

Firing mode:

Single sequential

Air Consumption:

4 – 8 CFM

Magazine Capacity:

100 Brad nails & 85 staples

Nail size:

18

Gauge brad nails

 

(Head size 1.9 - 2.2 mm) only

Staple size:

18

Gauge staples

 

with 5.7mm crown

Brad Nail lengths:

10mm – 50mm

Staple lengths:

13

– 40 mm

Tool Weight:

1.45kg

Air Inlet:

1⁄4” PT

Tool Dimensions:

250 x 60 x 250mm

3

Image 18
Contents Finishing Nail GUN KIT Contents Introduction Description of symbolsSpecifications Environmental protectionGeneral safety instructions for air tools Page Important safety instructions Risk of eye or head injury What could happen How to prevent itRisk of fire or explosion Risk of loss of hearing Risk to injuryRepair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Risk of cut or burnsKnow your product Preparing the tool Tool lubricationOperation Where to use finishing nailerChecking the safety strike element Operating the tool Firing mechanismAir source Adjusting the exhaust directionAdjusting the fastening depth Clearing a jamTroubleshooting Magnesium Brad NAILER/STAPLER GUN Contents Introduction General safety instructions for air tools Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Know your product Preparing the tool Where to use brad nailer/stapler Air source Driving brad nails/staples Has loss of powerNailer/stapler skips when Nailer/stapler runs slow orFraming GUN KIT Contents Nails General safety instructions Additional safety rules for framing gun nailers Page Important safety instructions Risk of eye or head injury Risk of loss of hearing Repair servicing should be done only by an authorized Risk of electric shock Risk of entanglement Non marking tip Air inlet not shown Selecting compressor Selecting air hose Tool lubricationOperating the tool Where to use framing nailerAdjusting depth of nailing Single full sequential actuation firingMaintenance Connecting the air hoseMaintenance of nailer Cleaning Maintenance of compressor, air settings and air hoseRepairs Tool or in trigger area Nailer runs slow or has Trouble Possible cause Suggested remedy Nailer skips whenDriving nails Air leaking near